purely out of curiosity.... 750rwhp...
#1
purely out of curiosity.... 750rwhp...
so im very happy with my setup, and the power it made...
say in the future i want more power (which i probably will) and wanted an ultimate goal of 750rwhp. how doable is it with the D1SC? My future plans were to forge my motor (rods/pistons), main studs/headstuds/ls9 gaskets, 317 heads (stock), replace my cam with bobs blower cam, meth kit and run like a 3.40" blower pulley on the SDCE J-bracket. and hope to be right around 14-16psi. how close would i be to my ultimate goal? just out of curiosity of course. itd be a year before id foge the motor, unless mine takes a **** during nice weather next year.
Thanks!
say in the future i want more power (which i probably will) and wanted an ultimate goal of 750rwhp. how doable is it with the D1SC? My future plans were to forge my motor (rods/pistons), main studs/headstuds/ls9 gaskets, 317 heads (stock), replace my cam with bobs blower cam, meth kit and run like a 3.40" blower pulley on the SDCE J-bracket. and hope to be right around 14-16psi. how close would i be to my ultimate goal? just out of curiosity of course. itd be a year before id foge the motor, unless mine takes a **** during nice weather next year.
Thanks!
#5
Very nice setup. i find it really hard paying $2000+ for a set of heads though :-/ id almost just have a set of 317's ported/polished locally and see where that gets me. i thought about upgrading my headers/exhaust system also..
i wish my engine bay was as clean as yours.
i wish my engine bay was as clean as yours.
Trending Topics
#12
LS1Tech Sponsor
iTrader: (16)
so im very happy with my setup, and the power it made...
say in the future i want more power (which i probably will) and wanted an ultimate goal of 750rwhp. how doable is it with the D1SC? My future plans were to forge my motor (rods/pistons), main studs/headstuds/ls9 gaskets, 317 heads (stock), replace my cam with bobs blower cam, meth kit and run like a 3.40" blower pulley on the SDCE J-bracket. and hope to be right around 14-16psi. how close would i be to my ultimate goal? just out of curiosity of course. itd be a year before id foge the motor, unless mine takes a **** during nice weather next year.
Thanks!
say in the future i want more power (which i probably will) and wanted an ultimate goal of 750rwhp. how doable is it with the D1SC? My future plans were to forge my motor (rods/pistons), main studs/headstuds/ls9 gaskets, 317 heads (stock), replace my cam with bobs blower cam, meth kit and run like a 3.40" blower pulley on the SDCE J-bracket. and hope to be right around 14-16psi. how close would i be to my ultimate goal? just out of curiosity of course. itd be a year before id foge the motor, unless mine takes a **** during nice weather next year.
Thanks!
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
#16
well my plans for next year were to...
-Add 4.00" Pulley (Try to get 8psi out of it instead of 5.5ish...)
-Meth kit 100%
-New exhaust (mines too loud)
-Suspension
-retune
-Maybe get rid of my BBK intake and try to pick up a FAST or just grab an LS6
i wonder if id be over 600rwhp?? i would think so.
-Add 4.00" Pulley (Try to get 8psi out of it instead of 5.5ish...)
-Meth kit 100%
-New exhaust (mines too loud)
-Suspension
-retune
-Maybe get rid of my BBK intake and try to pick up a FAST or just grab an LS6
i wonder if id be over 600rwhp?? i would think so.