Still in mock-up and already want to upgrade
#1
Staging Lane
Thread Starter
iTrader: (3)
Join Date: May 2011
Location: Riesel Texas
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Still in mock-up and already want to upgrade
Hey guys, I'm putting together a '84 chevy truck with a 6.0 engine and a BW S475 turbo. It's a race only build. I have a '05 lq4 engine, going with forged rods and pistons, 317 heads, edelbrock intake and blow through carb. I have a 4k stall convertor in front of a th400. It has a ford 9" with 4.30 gears ( for now) and 32 inch tall slicks. It weighs 3400# with me in it. The problem is, that I have a new S475 turbo, but found a Turbonetics 101mm thumper with ceramic bearings for less than a grand. It only has 30 1/8 mile passes on it. I don't have the a/r on it yet, and it has a small turbine housing. They went with a precision 106mm. Problem is, I'm not sure if it's going to be over kill or not. I'm not looking to break any records with this thing, just a week end warrior type of toy. I'd eventually like to run the 5.80 index in the 1/8 mile with it.
So what do you guys think? Will the thumper be too big? I'm thinking with the small turbine housing, 4k stall, two step and trans brake, I could possibly get it to spool. Any and all opinions are appreciated. Thanks.
So what do you guys think? Will the thumper be too big? I'm thinking with the small turbine housing, 4k stall, two step and trans brake, I could possibly get it to spool. Any and all opinions are appreciated. Thanks.