LQ4 S480 Build
#1227
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Thanks man!
Took the car out last night there are a lot of things to work out this time around. New rear viking shocks travel limiters up front and this co2 controller. So first pass blew the tires off and by the 3rd it got a little traction but i think i need to adjust the limiters so i'll give it another shot again sat. Controller was giving me issues wouldn't build more than 13psi for some reason so i'll contact Randy today to see if he has any suggestions but the car felt real strong for 13psi and only 14* timing on straight pump gas
Took the car out last night there are a lot of things to work out this time around. New rear viking shocks travel limiters up front and this co2 controller. So first pass blew the tires off and by the 3rd it got a little traction but i think i need to adjust the limiters so i'll give it another shot again sat. Controller was giving me issues wouldn't build more than 13psi for some reason so i'll contact Randy today to see if he has any suggestions but the car felt real strong for 13psi and only 14* timing on straight pump gas
#1230
TECH Fanatic
iTrader: (16)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I will switch to viking coilovers all around for next year but ive just got too much money into this year already.
#1232
Teching In
iTrader: (17)
Join Date: Sep 2006
Location: Niles / Carbondale, IL
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Do you have any issues with your belt slipping off a rib on the balancer pulley when you get into high RPM? I have the identical belt/accessory setup except I have factory pulleys on the alt. and power steering. Mine keeps trying to walk off the front of the balancer. what belt length are you using?
Last edited by Berz28; 05-16-2014 at 01:37 PM.
#1233
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
That gives me hope for when i hit the track this year. Ive got Strano springs all around with Comps in the back and KYB AGX's up front. My plan was to set the fronts almost at full loose and leave the rears at 50/50. I'm just looking to cut 1.5s. 6spd makes it challenging but hopefully the tire makes up for it.
I will switch to viking coilovers all around for next year but ive just got too much money into this year already.
I will switch to viking coilovers all around for next year but ive just got too much money into this year already.
Thanks man!!
Do you have any issues with your belt slipping off a rib on the balancer pulley when you get into high RPM? I have the identical belt/accessory setup except I have factory pulleys on the alt. and power steering. Mine keeps trying to walk off the front of the balancer. what belt length are you using?
#1235
TECH Fanatic
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Mine would do this also at times. I had the cbr relocation bracket for alternator. Just tighten it really good. I would even crank mine and tighten while it was running so I could see belt flop between the hits of the cam.
#1237
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
So after last year when I broke the flexplate car always had an issue building more than 12psi so after an unsuccessful track day we smoke tested it and once I pulled the foam off found this little crack
![](http://i39.photobucket.com/albums/e151/Gsxr1000Z71/IMAG0669_zpsaymuyyur.jpg)
Got a new intake on and the car is making more power than it ever has. Actually shocked the hell out of me this is a 17psi 12.5* timing pull straight pump haven't touched meth yet.
17psi Pull 370 S480:
![](http://i39.photobucket.com/albums/e151/Gsxr1000Z71/IMAG0669_zpsaymuyyur.jpg)
Got a new intake on and the car is making more power than it ever has. Actually shocked the hell out of me this is a 17psi 12.5* timing pull straight pump haven't touched meth yet.
17psi Pull 370 S480:
Last edited by Camaro9969; 05-19-2014 at 06:24 AM.
#1240
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Glad i found it also it was a massive leak just hope the turbo is ok for now i'll make a few passes and check it again.
I'll def give you some numbers after we get it squared away but now thats what is going on right now it hooks then unloads but it was down a ton of power so this week i'll finally get some good data.............You have limiters up front????