how much power and boost???
Thread Starter
TECH Addict
iTrader: (16)
Joined: Mar 2004
Posts: 2,645
Likes: 0
From: Dallas/Denton/Houston
how much power and boost??? hey guys i am new to the board and am looking for answers from veterans on forced induction. i have just built my lt4 383 from the ground up. the internals are eagle forged crank and h-beam rods and JE 8.1 dished pistons. AFR hydra-rev kit, New AFR 210 heads that flow about 300, 1.6 rockers, port matched intake, 58mm throttle body, 232/248 @ 113, procharger D1-SC with asp cogs pullied to 15#, and a griffin intercooler like Pro Stock Johns. sumped tank with a -10 feed and -6 return to MSD 50# injectors. this is going to the ground through a fidanza flywheel, Spec stage 3 clutch, carbon fiber drive shaft and moser 12 bolt with 3.55.
how much power will this set up make and how much boost is safe? Any comments/suggestions on this setup are appreciated.
how much power will this set up make and how much boost is safe? Any comments/suggestions on this setup are appreciated.
TECH Enthusiast
Joined: Dec 2001
Posts: 553
Likes: 0
From: Columbia, MD
Originally Posted by ZR28
hey guys i am new to the board and am looking for answers from veterans on forced induction. i have just built my lt4 383 from the ground up. the internals are eagle forged crank and h-beam rods and JE 8.1 dished pistons. AFR hydra-rev kit, New AFR 210 heads that flow about 300, 1.6 rockers, port matched intake, 58mm throttle body, 232/248 @ 113, procharger D1-SC with asp cogs pullied to 15#, and a griffin intercooler like Pro Stock Johns. sumped tank with a -10 feed and -6 return to MSD 50# injectors. this is going to the ground through a fidanza flywheel, Spec stage 3 clutch, carbon fiber drive shaft and moser 12 bolt with 3.55.
how much power will this set up make and how much boost is safe? Any comments/suggestions on this setup are appreciated.
how much power will this set up make and how much boost is safe? Any comments/suggestions on this setup are appreciated.
Trending Topics
Thread Starter
TECH Addict
iTrader: (16)
Joined: Mar 2004
Posts: 2,645
Likes: 0
From: Dallas/Denton/Houston
i have a few more ?s, what oil should i run with this set up, i had planned to put 114-116 octane in it and just run open loop on the tune. Also i would like opinions on who or which shop is the best at tuning f.i. lt1/lt4 cars, as of right now im looking at SpeedWorks in Lewisville. any input is great, thanks.
one more thing, where is everyone mounting there BOVs because i just bought a turbonetics godzilla BOV and want to know the best place to mount it.
one more thing, where is everyone mounting there BOVs because i just bought a turbonetics godzilla BOV and want to know the best place to mount it.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo I am running Redline synthetic.
I have been dynoing with VP C12, which is basically 110 leaded.
I have a FAST system.
My Vortech Mondo Bypass is mounted on my FMIC on the inlet side.
I have been dynoing with VP C12, which is basically 110 leaded.
I have a FAST system.
My Vortech Mondo Bypass is mounted on my FMIC on the inlet side.
Thread Starter
TECH Addict
iTrader: (16)
Joined: Mar 2004
Posts: 2,645
Likes: 0
From: Dallas/Denton/Houston
im mounting the d1sc today, woohoo. with my new cog pulleys thanks to this board, the fmic will be mounted this weekeng thanks to this board. i will post pics tonight if anyone is interested. one more thing psj what weight are you running.