Advice for a 600rwhp turbo setup?
#21
Teching In
Join Date: Mar 2004
Location: 6 Second Ecotec Club
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 1point3liter
lmao... I wasn't exspecting to see you posting here.
I'm motivated. Hopefully it won't take me too long to come up with the funds to piece it together. I'll give you a call tomorrow. Thanks.
I'm motivated. Hopefully it won't take me too long to come up with the funds to piece it together. I'll give you a call tomorrow. Thanks.
#22
TECH Senior Member
iTrader: (48)
dimond pistons (sponsers carry them to the right) has alot of different pistons CR available for the ls1, aka alot of boost pistons.
i am shooting for 600rwhp on 94 octane with my 8.9:1, might take some tunning, but i think shes got it in her.
if you can only get 91 or 92 you might want to go 8.5:1, i wouldnt go any lower then that
i am shooting for 600rwhp on 94 octane with my 8.9:1, might take some tunning, but i think shes got it in her.
if you can only get 91 or 92 you might want to go 8.5:1, i wouldnt go any lower then that
#23
TECH Regular
Thread Starter
Join Date: May 2003
Location: Jacksonville, FL
Posts: 404
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Speedfab
hehe... figured that might get a laugh. Bottom line: When I start kicking around ideas about how to approach a friend's project, especially one that genuinely interests me as well and is something with which I will accept no less than the best possible results, expect me to get busy and do some homework.
Thanks I've been reading plently and are confident the car will haul ***. If it doesn't we'll just have put my old boost controller on it. That'll make anything ride out.
#24
TECH Regular
Thread Starter
Join Date: May 2003
Location: Jacksonville, FL
Posts: 404
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by smokinHawk
dimond pistons (sponsers carry them to the right) has alot of different pistons CR available for the ls1, aka alot of boost pistons.
i am shooting for 600rwhp on 94 octane with my 8.9:1, might take some tunning, but i think shes got it in her.
if you can only get 91 or 92 you might want to go 8.5:1, i wouldnt go any lower then that
i am shooting for 600rwhp on 94 octane with my 8.9:1, might take some tunning, but i think shes got it in her.
if you can only get 91 or 92 you might want to go 8.5:1, i wouldnt go any lower then that
If any of you are interested I can let you know more details as they are available to me. I'm hopeing to run this setup on my vehicle. Check out my website at [plug]www.widebando2.com.[/plug]