Project "Because Streetcar"
#43
TECH Fanatic
Thread Starter
iTrader: (13)
Join Date: Jan 2009
Location: Fenton, MI
Posts: 1,644
Likes: 0
Received 0 Likes
on
0 Posts
Well I happened to encounter quite a few slicked up turbo cars with a stalled auto. From what I've seen, cruising along on a concrete road (so it's not like you stopped on the highway and did a burnout or prepped anything), the stalled auto cars would have a lot of problems with traction from a roll, lag at first and when the thing finally lights up and the torque curve goes vertical the tires get blown away. Just the way the power came in with the auto/converter. You could fix this with a tight converter but then you are going to need a responsive turbo setup, not a huge single. BTW with a manual valve body auto, I don't believe you can do any wide open throttle downshifting without damaging the trans.
With the stick I could be up a gear from optimal and load the engine harder, if it got a little tire spin it was easy to modulate.
IMO I don't think you could consistently brake boost it and get it to work correctly. A good set of twins will punch it from a roll and be gone instantly so you will always be playing catch-up. Even if you run for a mile you will need to have 500+hp on whoever you are racing to make it up in that distance.
As for single turbo selection I will bow out of that one as I personally wouldn't do it.
With the stick I could be up a gear from optimal and load the engine harder, if it got a little tire spin it was easy to modulate.
IMO I don't think you could consistently brake boost it and get it to work correctly. A good set of twins will punch it from a roll and be gone instantly so you will always be playing catch-up. Even if you run for a mile you will need to have 500+hp on whoever you are racing to make it up in that distance.
As for single turbo selection I will bow out of that one as I personally wouldn't do it.
Lots of great points, thank you... There is so much to think about... So many variables.
#44
TECH Fanatic
Thread Starter
iTrader: (13)
Join Date: Jan 2009
Location: Fenton, MI
Posts: 1,644
Likes: 0
Received 0 Likes
on
0 Posts
What I don't completely understand, is why everyone says go twins, itll spool faster...
Youre using half your engine, to spool a turbo half the size...
What am I missing?
#51
TECH Junkie
iTrader: (3)
IMO, the only time a 106mm turbo makes sense is for a drag-only car with an impractically high stall torque converter.
Decent sized twin turbos on a forged rotating assembly with all the beefed cap, bearing, and bolt goodies 427 should make for an incredible amount of HP and streetability. Transferring it to the ground will be your biggest challenge.
Decent sized twin turbos on a forged rotating assembly with all the beefed cap, bearing, and bolt goodies 427 should make for an incredible amount of HP and streetability. Transferring it to the ground will be your biggest challenge.
#52
Staging Lane
iTrader: (4)
Join Date: Feb 2011
Location: Columbus, Ohio
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
I think you should put a little more thought in to the street ability of a car like this. I know your not interested in track times but you are wanting to build a beast that you can "Drive hundreds of miles". Ask Mark Carlyle when he stopped bringing the vette out? That was/is a street car as well and we never see it out anymore and he used to bring it out all the time. Im not saying that its not possible but there is a point where its not capable of being a street car anymore. People can call them street cars all day long but the fact is that they are not very streetable and all you end up doing is bringing them out to make an appearance 2 or 3 times a year. You cant race because the street wont hold that kind of power and you usually just end up beating up or breaking high dollar race car parts for nothing but an appearance. Its just not worth it.
#53
Launching!
iTrader: (9)
Join Date: May 2011
Location: Carlisle, PA
Posts: 257
Likes: 0
Received 0 Likes
on
0 Posts
I know what you plan to do with the car but have you considered a lager procharger like a f2 or an f3. The car will be a lot easier for you to get setup. You can run a nice tight converter that will pull hard on the top end, because you dont need a big stall to build the boost.
P.S the power delivery will always be predictable. Very linear.
P.S the power delivery will always be predictable. Very linear.
#54
TECH Enthusiast
Join Date: Sep 2010
Location: North Central Ohio
Posts: 580
Likes: 0
Received 0 Likes
on
0 Posts
I know what you plan to do with the car but have you considered a lager procharger like a f2 or an f3. The car will be a lot easier for you to get setup. You can run a nice tight converter that will pull hard on the top end, because you dont need a big stall to build the boost.
P.S the power delivery will always be predictable. Very linear.
P.S the power delivery will always be predictable. Very linear.
#55
Im pretty new to turbos and stuff but if you wanted the big single mabey set it up with a spool valve I don't know much about them or if they would work with something like this but it would be different which seems to be what your going for.
#58
TECH Fanatic
iTrader: (16)
I am NOT saying this to be degrading/mean but if you really dont understand why properly sized twins will spool faster (and make the same power) than a big single then you have some more research to do. And from the tone of your posts, you are researching, which is good. I just dont feel like typing a worthwhile explanation because its gonna take some time.
i would go with twins on a large motor/streetcar build. 4l80 would be perfect too. if its a street car, youll want the extra gear and its every bit as strong as the 400.
Regardless of what route you choose, you are going to have to get a boost controller that ramps boost in really well. you wont even be able to go WOT(if at all) until well over 100mph.
I look forward to the build!
i would go with twins on a large motor/streetcar build. 4l80 would be perfect too. if its a street car, youll want the extra gear and its every bit as strong as the 400.
Regardless of what route you choose, you are going to have to get a boost controller that ramps boost in really well. you wont even be able to go WOT(if at all) until well over 100mph.
I look forward to the build!
#59
FormerVendor
Didn't mean to make it seem like twins and a 4l80e sucks, I'm building just that for my own car. Just depends on your goals.
#60
TECH Addict
iTrader: (53)
Ok. Then I'm not as worried! Haha. Goals are DIY twin turbo setup with 4L80e conversion. Purposes are show car, street cruiser, and an occasional trip to the track. I'd want it "fun" on the street, be able to drive on the highway (80e), and able to take it to the track if I wanted to. A good "all around" car.