HolyShiznit

iTrader: (11)

That's good to know gives hope that I can fix the choke point of the system. Thanks Jon!

-Jon

slowride

iTrader: (3)

According to turbonetics the 76 billet will edge out the 78 cast, but I'm not sure thats proven yet. These t series are also slightly smaller than a precision 7675 on the compressor housing which will help some guys fit them.

chub406

Nice to see another lq4 turbo Iowa boy! lol Redrocket. Do me a huge favor. Swing up to Cedar Rapids and give me a ride. That way I know what to expect. lol
Great to see vids are starting to come in and some results!

RedRocketZ28

iTrader: (19)

If you ever get down this way let me know. Would be glad to give you a ride in the car. I don't make it over your way very often, ha.

Superman09

iTrader: (65)

Thanks guys! Good updates and info in here

If anyone needs one of these, contact me!

Jon

Jake99

iTrader: (2)

Camaro is a ls1 317 heads 228r cam with a 6 speed, it spun to a 1.74 60 foot and went 10.98 @ 130 on 14psi 14 degrees of timing and was running out of fuel, Its been 1.64 before and should better that 60 foot yet, I see 10.60s on this boost yet

chub406

I might take you up on that! I have friday off. lol Sad to say but Iv'e yet to ride in a fast turbo car.
How high have you spun it with the 7875? I know the .68 mm ones could choke a 6.0l.

RedRocketZ28

iTrader: (19)

I had an on3 76mm with the 64.5 mm hotside and spun it to 6k. It actually ran very well and surprised me when it put down over 600 on 14 lbs. I have not done anything to the tune after swapping on the 7875. I am still spinning it to 6k but it feels a lot better. The tune still needs some final touches before I would call it "good". A guy in Kansas City has been doing the tuning and we haven't had a chance to meet up in person to get it dialed in. It is pretty darn close for just sending him logs over email though.

regblkss

Ordered mine last night. 7675billet with a 1.15ar can't wait to get it.

Superman09

iTrader: (65)

offaxis

iTrader: (19)

That's the one I have . Where in ny are you located ?

regblkss

I live about 30 min south of Syracuse

Superman09

iTrader: (65)

Superman09

iTrader: (65)

We have a bunch more of these on order for stock to help keep build times down to nothing for you guys! Who needs one or any other Turbonetics unit for that matter?

97WS6SCharged

iTrader: (1)

Don't know if it's been asked but how do these compare to a TC78? Not looking for crazy power just a fun driving car with a 370 LS motor and 6 speed.

Superman09

iTrader: (65)

You will find your back-pressure will be decreased quite a bit, allowing you to make more power, as well as prevent the power from falling off in the upper RPM range! Being as you have a 370, you would really benefit from the 75mm turbine wheel in this compared to the 68mm turbine wheel in the TC78.... much more suited turbo for your engine size!

Huron Speed

iTrader: (1)

we can always add to the order!

-Casey

Jake99

iTrader: (2)

https://ls1tech.com/forums/drag-raci...0s-friday.html

Went 7 tenths and 7mph faster with my new turbo and ptc converter on only 1psi more boost...

chub406

What turbo did you switch from?

Superman09

iTrader: (65)

Terrific results!!!!

Who else needs one!?