20michael

Sweet I'm looking forward to seeing what that monster bw can do

mrstepheneades

Heres a run down of parts list for this build..... if i can remember it all

THE TURBO STUFF

Borg Warner s400-75 turbo with 96mm turbine, 1.32a/r, t6 flange from Forced Inductions
JGS 56mm Blow Off Valve
JGS 50mm WasteGate
-4an Oil Feed
-12an Oil Drain back to timing cover
CX Racing 31x12x4 intercooler
CX Racing Aluminum 3" Cold Piping
2.25 Stainless Y Pipe
5" to 4" Stainless Downpipe

THE ENGINE STUFF

Tick Performance Cam 612/610 lift..234/237 Duration.. 115+4 LSA
Daul Valve Springs, Retainers, Locators, Valve Stem Seals, Pushrods from Tick Performance
LS2 Timing Chain
LS6 Oil Pump
CBR Alternator Relocation Bracket
Welded Solid Motor Mounts
Everything Else Stock

FUEL

FIC 1000cc Injectors
Twin Walbro 340s
Stock Lines and Rails
Alcohol Injection Systems Trunk Mounted Methanol Kit with Twin 10lb per hr Nozzles

DRIVETRAIN

Monster Level 3 Clutch with Billet 28lb Flywheel
New GM Slave Cylinder with Tick Remote Bleeder
Tick Adjustable Master Cylinder
Stock Rear and Stock T56

COOLING

Stock Fan Flipped Around to the Front for Pushers, Reversed wires on the harness
Stock Radiator

SUSPENSION

BMR Front Springs and New Shocks
One Coil Removed Off Rear Springs, Isolators Removed, Hose Mod


I think that is all lol, if there is more i will edit the post...

Sales@Tick

iTrader: (3)

Great parts list, you have some good stuff in there! Now you need a fab 9" and a level 3 viperized t56 built by tick performance...

mrstepheneades

just go ahead and put those on order I'll write you a check but I'm not promising there's any money backing it lol lol.....jk

Camaro9969

iTrader: (12)

Ill sell you my moser 12 when I go with a fab 9"

mrstepheneades

I have no money for anymore stuff lol... I gotta recover from this build.

Midwest has best deal i think on the fab 9, think you get rear complete with axles, guts, torque arm and all for like 2700... Still a big chunk for me but seems reasonable for all that.

Sales@Tick

iTrader: (3)

MWC does have the best prices out there for the parts you will need. They also have a TON of options and different ways to go which is nice.

mrstepheneades

i got a friend that can get ford 9" center sections for about free and we might try to fab one in for very little cost... I dont know this build has about burned me out on my own stuff. Its a lot more fun spending someone elses money than my own hard earned dollar.

Cant wait to start on this other guys pt88 408ci ta.

mrstepheneades

Got the Hood latches done last night and the boost gauge installed.. ready for tuning now.!!

AeroCatch Latches


Autometer Gauge

Sales@Tick

iTrader: (3)

Love those hood latches.

mrstepheneades

You guys know i love taking pictures. Well here are some from yesterday. What do you think?? All cleaned up...



















Dyno day I am hoping to be May the 6th.............

mrstepheneades

Thanks. My friend david said they use them on the race vipers at the shop he works at. I got mine on ebay for 83 bucks shipped. Then yesterday he brought a set to me with about 4 sets of extra pins for free lol. Said wish i had known you was gonna do that i could've save some money lol. I got some spares now though. I seen Flash had them on his car (mightymouse old car). Good to know they will hold up to some high speed. Even though i seen his hood was flexed up in that one photo of him racing the lambo. I wont be going that fast anyway lol. Looks like he may need another one in the dead center lol...

Sales@Tick

iTrader: (3)

I bet it would surprise you how fast it would go at one of those events on about 18-20 PSI and race fuel.

mrstepheneades

EGR Port in the intake.. I put a rubber expanding freeze plug which fit super tight... Then i taped off the side holes and filled entire area with fiberglass resin. Then painted the top the color of the car.

Besides the little dots sticking up where the bolts are in freeze plug and other original hold down its like it was never there.

mrstepheneades

Get a few runs out of it then be lifting the heads lol since they've never been off the car.

Suppose to tune next monday. And question, where locally can i buy 100% methanol to run in my system? Ordering online the shipping cost more than the methanol.....

Camaro9969

iTrader: (12)

Car looks great love the exhaust out the bumper!!
Some kind of LSx badge over the egr port would look cool I think

mrstepheneades

yeah lol..... ill find something to put there. Trying to find a local source for methanol. Something i dont have to drive 20 miles to get!

FEAR LS

iTrader: (8)

I never should have clicked that damn link in your sig... I read your entire thread up to this post. My wife is going to hate both of us! LOL

Clean setup man, great thread as well. I want to do something very similar with my 408.

Subscribed for numbers!!

Sales@Tick

iTrader: (3)

We can make that happen!!!

mrstepheneades

At least thread isn't 20 pages.....YET haha.. I like to keep details of all I do so others can learn from my backsets and screwups. I'd love to have a 408 lol... and a 94mm lol