b16gsr 99 AW FRC Vette build, 5.3L, F1C, TR6060, Tick Performace,*6.29.13Update*
#121
TECH Enthusiast
iTrader: (7)
Join Date: Feb 2011
Location: frederick, Maryland
Posts: 562
Likes: 0
Received 0 Likes
on
0 Posts
and your doing e85. thatll be alot of fuel lol. debating on the wrap and dint think they were that shiney from the walk around video you posted. so i need to look into them some more. thanks for answer my question the the trans hose
#122
TECH Regular
Thread Starter
iTrader: (5)
Join Date: Sep 2007
Posts: 408
Likes: 0
Received 0 Likes
on
0 Posts
you bet, i have learned a lot about the c6 stuff with this build.
#124
Hurry up and take some more progress pics!
#133
TECH Regular
Thread Starter
iTrader: (5)
Join Date: Sep 2007
Posts: 408
Likes: 0
Received 0 Likes
on
0 Posts
Well time has drown closer to completion the last 2 days working until midnight after working 14 hour shifts.
Fuel system, fan shroud modifications and top side electronics are all that's left. Taking a break tonight, but will have Thursday to get all of that work done before it heads to my good friend Collins for fab work Saturday.
A little radiator massage will be necessary.
Passenger side:
Drivers side:
Almost there:
Underside done minus mods to mufflers to work with C6 swap.
Fuel system, fan shroud modifications and top side electronics are all that's left. Taking a break tonight, but will have Thursday to get all of that work done before it heads to my good friend Collins for fab work Saturday.
A little radiator massage will be necessary.
Passenger side:
Drivers side:
Almost there:
Underside done minus mods to mufflers to work with C6 swap.
#137
TECH Regular
Thread Starter
iTrader: (5)
Join Date: Sep 2007
Posts: 408
Likes: 0
Received 0 Likes
on
0 Posts
Thank you sir.
Cold side piping acquired today from a local company. Great people with lots of options.
IF anyone would ever need any plumbing call RC or Calvin.
http://www.globaltecheng.com/default.asp
3" lower and 3.5" upper all will be welded and v-band except for at intercooler, throttle body and blower.
Cold side piping acquired today from a local company. Great people with lots of options.
IF anyone would ever need any plumbing call RC or Calvin.
http://www.globaltecheng.com/default.asp
3" lower and 3.5" upper all will be welded and v-band except for at intercooler, throttle body and blower.
#138
TECH Regular
Thread Starter
iTrader: (5)
Join Date: Sep 2007
Posts: 408
Likes: 0
Received 0 Likes
on
0 Posts
Rear fuel system done and put back together.
ECS Fuel block -8an out to RPS -8an 100 micron filter to -8an input to Bosch 044 external pump to -10an output to fuel rail.
The fender line covers it all up, forgot to snap an image of that.
Car is loaded up and at home with me this weekend for all the cold side piping completion.
ECS Fuel block -8an out to RPS -8an 100 micron filter to -8an input to Bosch 044 external pump to -10an output to fuel rail.
The fender line covers it all up, forgot to snap an image of that.
Car is loaded up and at home with me this weekend for all the cold side piping completion.
#140
TECH Regular
Thread Starter
iTrader: (5)
Join Date: Sep 2007
Posts: 408
Likes: 0
Received 0 Likes
on
0 Posts
Finish fuel system, paint the piping and reassemble interior.
Fab work is done.
A huge thanks to my good friend Collin for all the kick *** work today. The man is a magician when it comes to welding.
First order of business, extend my Ti mufflers and mod the x pipe for the C6 diff and trans swap.
Mock up begins:
The man know what he is doing, 3 cuts and we were here.
The man TIG'n away
Intercooler mounts
This took MIG because the metal coating in the framerails.
Top side done
Awesome welding skills. Will take more pics of everything finished tomorrow.
Even on the junk used Big Red flange.
A HUGE thank you to Collin for all the work today. Seriously proud to have you work on my car.
Fab work is done.
A huge thanks to my good friend Collin for all the kick *** work today. The man is a magician when it comes to welding.
First order of business, extend my Ti mufflers and mod the x pipe for the C6 diff and trans swap.
Mock up begins:
The man know what he is doing, 3 cuts and we were here.
The man TIG'n away
Intercooler mounts
This took MIG because the metal coating in the framerails.
Top side done
Awesome welding skills. Will take more pics of everything finished tomorrow.
Even on the junk used Big Red flange.
A HUGE thank you to Collin for all the work today. Seriously proud to have you work on my car.