Twin truck kit.
Thread Starter
Truck Sponsor
iTrader: (11)
Joined: Sep 2006
Posts: 3,122
Likes: 0
From: Wichita Falls Tx.
Twin truck kit. Not a car but was a cool build.
These were 52/52 so next ones would be
61/52 or larger.
The manifolds flange had enough room we can switch to a T4 pretty easy.
If the customer ever maxed these out.
4x4 street truck wants 800 cruising power.
HX will be a full size radiator in the front.
These were 52/52 so next ones would be
61/52 or larger.
The manifolds flange had enough room we can switch to a T4 pretty easy.
If the customer ever maxed these out.
4x4 street truck wants 800 cruising power.
HX will be a full size radiator in the front.
Thread Starter
Truck Sponsor
iTrader: (11)
Joined: Sep 2006
Posts: 3,122
Likes: 0
From: Wichita Falls Tx.
The IC is an in house design.
It fits between the fans, and the water pump area.
It has air dividers inside to guide the air into the core.
We done this type of set up for single kits also.
It fits between the fans, and the water pump area.
It has air dividers inside to guide the air into the core.
We done this type of set up for single kits also.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
