ls9 in 5.3?
#21
#22
12 Second Club
Thread Starter
iTrader: (3)
Join Date: Mar 2010
Location: Guthrie,Oklahoma
Posts: 654
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
O ok, I was about to **** if you made 430 with out the turbo haha. But cool im so ready to get my stuff ordered and at my door step haha. Thanks for all the help guys
#25
9 Second Club
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I used a premade extension. Was PERFECT length, not an inch to spare, and works flawless
http://goo.gl/JwyJy
http://goo.gl/JwyJy
When you extend the wires for the new sensor you need to flip the 2 outside wires for the sensor and then add the 1k 1/4watt resistor across the 2 wires you just flipped.You can get the resistor at any radio shack, they run about $1.29 for a 5 pack.
#26
Staging Lane
iTrader: (2)
Join Date: Jul 2010
Location: Kenosha WI
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I had read about it, and knew wires had to be swapped, but I was unaware of the resistor.
Good info! Thanks for the share
**Ill check down my extension for resistors, didnt see any on it at first glance, but ill peel back some loom to check it out
Good info! Thanks for the share
**Ill check down my extension for resistors, didnt see any on it at first glance, but ill peel back some loom to check it out
Last edited by asb2106; 06-13-2013 at 01:17 PM.
#28
9 Second Club