What body modifications need to be done for a d1sc?
What body modifications need to be done for a d1sc? I know this is kind of a dumb question, but hear me out. I have been trying to find details for my car from the previous owner and found his car domain page for it today. On there he said he was having a d1sc installed and was waiting on his SDCE bracket and new intercooler. I haven't pulled the plate cover yet to see if it had a front mount but what else is modified on the car that might have been left over if it was removed before he sold it?
you will need to make sure you have all the piping for it, all the couplers and clamps, the bypass valve, the intercooler, the damper, the blower pulley, the head unit, the j bracket, the belt, the inlet hat, the filter, the sdce tensioner. id make sure i had all that.
That's quite the list of parts to go on. Didn't realize there was so much to it actually..
But what I am looking for is after the kit is completely removed, what evidence will remain on the car (certain holes cut or drilled, etc) that would prove the kit was there? I am just trying to learn my car's history is all really.
But what I am looking for is after the kit is completely removed, what evidence will remain on the car (certain holes cut or drilled, etc) that would prove the kit was there? I am just trying to learn my car's history is all really.
That's quite the list of parts to go on. Didn't realize there was so much to it actually..
But what I am looking for is after the kit is completely removed, what evidence will remain on the car (certain holes cut or drilled, etc) that would prove the kit was there? I am just trying to learn my car's history is all really.
But what I am looking for is after the kit is completely removed, what evidence will remain on the car (certain holes cut or drilled, etc) that would prove the kit was there? I am just trying to learn my car's history is all really.
uhmm...there is one thing....not concrete but usually on a stock motor they have to pin the crank when they install the procharger...you can check that. right on the crank pully. in order to cover that up they would have to replace the crank which i dont think they would've gone through the trouble.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
