Datsun 280z Turbo Build - 5.3 / T7875 / Magnum T56 - Video on page 12!
#234
8 Second Club
iTrader: (4)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Just blew the HG in my setup, thought I dont' think it had anything to do with timing. Depending on the cam 14-17* or so seems to be the standard for most on E85 and 10:1. I have peak torque around 14 and ramp up to 17* after 5500 or so. That was 25-26lbs. I run 50/50 meth inj and a cheap A2A IC.
#235
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Just blew the HG in my setup, thought I dont' think it had anything to do with timing. Depending on the cam 14-17* or so seems to be the standard for most on E85 and 10:1. I have peak torque around 14 and ramp up to 17* after 5500 or so. That was 25-26lbs. I run 50/50 meth inj and a cheap A2A IC.
#238
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
No dyno yet, still working on other things with the car. I have been creeping up on the boost, but the street tires make for a wild ride!
Been there, done that. Pulled him on 13#.
#240
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Haven't visited this thread in a while. The trailer sat for a year, but I'm about to hit it hard again with drag week looming in 3 weeks.
Pulled the box off it this weekend, and started measuring for the axle, frame, and rolling stock.
This is very close to the ride height that it will be. For reference, the top of the bed is 33" off the ground
Pulled the box off it this weekend, and started measuring for the axle, frame, and rolling stock.
This is very close to the ride height that it will be. For reference, the top of the bed is 33" off the ground
![](http://i592.photobucket.com/albums/tt4/steepss/SidwayZ/IMG_20140813_211949204_zpsilr8e6po.jpg)