Vortech owners check this lid out!
#81
10 Second Club
iTrader: (2)
Join Date: Sep 2002
Location: Orlando, Florida
Posts: 6,368
Likes: 0
Received 0 Likes
on
0 Posts
please give tracking numbers and email them to us.
Honestly Brian as a seller you should send these out to ensure they are packed right and definitely go out. You run the risk of problems by having someone else ship this for you.
i talk from experience when i bought something from another seller from this board and he in turn let someone else ship it out. Stuffed was badly damaged from improper packing and guess what,parts were missing....
Honestly Brian as a seller you should send these out to ensure they are packed right and definitely go out. You run the risk of problems by having someone else ship this for you.
i talk from experience when i bought something from another seller from this board and he in turn let someone else ship it out. Stuffed was badly damaged from improper packing and guess what,parts were missing....
#82
Trust me it will be fine.
a. he owns my race car, so it's just as good as me personally taking care of it..plus since I didn't make a dime on the lids, I'm trying to save a little on shipping
b. there is only one item in the box( the lid)
c. after fedex gets it, anything that happens to it is out of my control, should be ok unless some fedex employee decides to stack a crate motor on top of it!..lol
as soon as I get the info I'll e-mail it out..I'm still waiting on two more phone numbers before I can send the last two lids out
a. he owns my race car, so it's just as good as me personally taking care of it..plus since I didn't make a dime on the lids, I'm trying to save a little on shipping
b. there is only one item in the box( the lid)
c. after fedex gets it, anything that happens to it is out of my control, should be ok unless some fedex employee decides to stack a crate motor on top of it!..lol
as soon as I get the info I'll e-mail it out..I'm still waiting on two more phone numbers before I can send the last two lids out
#83
Staging Lane
Join Date: May 2004
Location: Winter Springs,fl
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
Brian-Can you post or email a list of names of those who did reply? I did, but I want to make sure you receieved it last week. I dont want to wait another week for you to say ooops I didnt get your info.
thanks
thanks
#89
10 Second Club
iTrader: (2)
Join Date: Sep 2002
Location: Orlando, Florida
Posts: 6,368
Likes: 0
Received 0 Likes
on
0 Posts
update, lid is on, air temp hole drilled , but having trouble closing the hood. I have to really push down to make it close. gahh, looks like i gotta do some more trimming
#93
Staging Lane
Join Date: May 2004
Location: Winter Springs,fl
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
Got me some-I running into the same issue, where I cant close my hood now. I dont want to slam to hard. Dont want to break the lid...Anyone else having hood clearance issues?
Thanks
Thanks
#94
10 Second Club
iTrader: (2)
Join Date: Sep 2002
Location: Orlando, Florida
Posts: 6,368
Likes: 0
Received 0 Likes
on
0 Posts
i push the hood down gently. i'm going to buy some playdoh and see where its rubbing on the lid and see if i can clearance the hood.
i still the like the lid though, and it did make a difference.
i still the like the lid though, and it did make a difference.
#95
I recieved mine looks fine a few things I would have liked to see different but it is still a nice lid. I am going to go to the dyno with mine and see how much it helps I talked with Jason at MTI and he also was interested to see so we are going to do a before and after comparison I will post up my results for you guys to see.
#96
Staging Lane
Join Date: May 2004
Location: Winter Springs,fl
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
I took the plunge and slammed my hood and it shuts. After opening and shutting very hard a few times, I couldnt find any scuffs on the lid. I too can tell a difference in the car..very little bit helps. When I re-dyno next month Ill post the difference.
#98
you need to do the pulla a wekk apart from eachother..the car needs time to relearn the new airflows..we did the back to back testing first and not much changed. When we gave it more time to relearn..thats when it made a huge difference..hope you guys enjoy