SOM LAG Project: 394ci, 25.3, Twin PT7675 Gen 2's, PG, E85, 7-second Street Car
#842
Officially on the market as a roller. Going to start there.
https://ls1tech.com/forums/market/1952109
For Sale:
My Trans Am roller is for sale. This will make a perfect platform for somebody to get out and do some racing and not have to worry about going too fast for cage certification.
Roller (no engine, no transmission, no power adders, no electronics). Chassis plus suspension, steering and body components
2001 Trans Am WS6 car – Sunset Orange Metallic (SOM) in color
Setup for a LS with Powerglide or Shorty TH400.
25.3 cage – still certed through early 2022
All Stock Suspension mounting points
Midwest chassis Fab 9” – Factory Width, 35 spline axles, spool with HD pro Aluminum case, 3.89 gear
Midwest Chassis (MWC) Torque Arm, LCA, Panhard Bar, K-member, Upper and Lower A-arms, Manual steering rack, manual brakes, parachute mount with Stroud Chute
SJM Manufacturing Linelock
Menscer Motorsports DA Shocks Front and Rear
Strange drag brakes front and rear
Manual brake kit
Light weight steering column and Grant removable wheel
Rock Solid Motorsports tube Front end
Griffin radiator and dual fans with stroud in back of car.
2 Jegs seats (Kirkey Knockoffs)
Dmh carbon door panels
Glasstek fiberglass dash
Joe Van O Carbon Liftoff hood
Kostick Carbon wing
Factory glass throughout car and have Optic armor front and rear Lexan (both are scratched)
Carbon roof skin
No wheels or tires (will have some steel wheels and radials to move the car)
Nasty Performance F-body sumped fuel tank (uses factory fill) and installed in factory location
Hood is scratched from and encounter with a fence at the end of the racetrack. Minor scratching in the roof. Other areas could use body work but overall in good condition (It’s a street driven race car)
Fastest 1/8 mile is 4.77@153.
Weighs about 3150 without driver
Price:
$18,500 bare roller with items listed above OBO.
Also have a LS Twin Turbo kit with Twin PT7675CEA’s and A2A Intercooler that could be added.
https://ls1tech.com/forums/market/1952109
For Sale:
My Trans Am roller is for sale. This will make a perfect platform for somebody to get out and do some racing and not have to worry about going too fast for cage certification.
Roller (no engine, no transmission, no power adders, no electronics). Chassis plus suspension, steering and body components
2001 Trans Am WS6 car – Sunset Orange Metallic (SOM) in color
Setup for a LS with Powerglide or Shorty TH400.
25.3 cage – still certed through early 2022
All Stock Suspension mounting points
Midwest chassis Fab 9” – Factory Width, 35 spline axles, spool with HD pro Aluminum case, 3.89 gear
Midwest Chassis (MWC) Torque Arm, LCA, Panhard Bar, K-member, Upper and Lower A-arms, Manual steering rack, manual brakes, parachute mount with Stroud Chute
SJM Manufacturing Linelock
Menscer Motorsports DA Shocks Front and Rear
Strange drag brakes front and rear
Manual brake kit
Light weight steering column and Grant removable wheel
Rock Solid Motorsports tube Front end
Griffin radiator and dual fans with stroud in back of car.
2 Jegs seats (Kirkey Knockoffs)
Dmh carbon door panels
Glasstek fiberglass dash
Joe Van O Carbon Liftoff hood
Kostick Carbon wing
Factory glass throughout car and have Optic armor front and rear Lexan (both are scratched)
Carbon roof skin
No wheels or tires (will have some steel wheels and radials to move the car)
Nasty Performance F-body sumped fuel tank (uses factory fill) and installed in factory location
Hood is scratched from and encounter with a fence at the end of the racetrack. Minor scratching in the roof. Other areas could use body work but overall in good condition (It’s a street driven race car)
Fastest 1/8 mile is 4.77@153.
Weighs about 3150 without driver
Price:
$18,500 bare roller with items listed above OBO.
Also have a LS Twin Turbo kit with Twin PT7675CEA’s and A2A Intercooler that could be added.
Last edited by Only ERO's; 09-02-2021 at 08:22 AM.
#847
Still making progress on parting out the Orange Car. Haven't had a seller for the car yet though. Plenty of messages, just no sale.
I was able to pick up the replacement and many of you will probably recognize it.
I ended up picking up Kenny's Calypso Fox. Absolutely loved the build he did on this thing and it was time to get into a Mustang for racing purposes.
We were meeting at Cordova on Friday and going to test it Friday and race it Saturday. Testing ended up getting rained out on Friday and we basically rolled it off his trailer and into ours.
Ended up racing in the Real Street class of the Central IL Street Car Shootout on Saturday. We had too hot of a tuneup the three test hits but we were able to get the car to go down starting in eliminations.
We won the first two rounds and then had a bye in round three putting us in the semi-finals. We decided to split with 3 cars left with the dew on the track.
I am looking forward to making more hits with this.
Quick video of just one hit:
Going to try to put together a video of the runs and get them online.
Not sure if I am going to continue with another thread or not. Mostly will post on Facebook and videos on Youtube.
Hoping to get this out the next couple of weekends and continue to make progress.
I was able to pick up the replacement and many of you will probably recognize it.
I ended up picking up Kenny's Calypso Fox. Absolutely loved the build he did on this thing and it was time to get into a Mustang for racing purposes.
We were meeting at Cordova on Friday and going to test it Friday and race it Saturday. Testing ended up getting rained out on Friday and we basically rolled it off his trailer and into ours.
Ended up racing in the Real Street class of the Central IL Street Car Shootout on Saturday. We had too hot of a tuneup the three test hits but we were able to get the car to go down starting in eliminations.
We won the first two rounds and then had a bye in round three putting us in the semi-finals. We decided to split with 3 cars left with the dew on the track.
I am looking forward to making more hits with this.
Quick video of just one hit:
Going to try to put together a video of the runs and get them online.
Not sure if I am going to continue with another thread or not. Mostly will post on Facebook and videos on Youtube.
Hoping to get this out the next couple of weekends and continue to make progress.
The following users liked this post:
The BallSS (09-07-2021)
#850
Awesome pick up. Love that car and the build. It's also a pretty proven combo.
The following users liked this post:
blackdak318 (12-06-2021)