PIc's For You Guys
COOL a pic of my car is on the SDCE website in the LS1 instruction page
It's the pic of the red bird doing a burnout at the track
Now they just have to add it to the customer rides section and we will be all set. They also have a Firehawk, and a white T/A convertible on the instruction page too.
Thanks SDCE
It's the pic of the red bird doing a burnout at the track Now they just have to add it to the customer rides section and we will be all set. They also have a Firehawk, and a white T/A convertible on the instruction page too.Thanks SDCE
On The Tree
Joined: Apr 2004
Posts: 196
Likes: 0
From: northeast
Originally Posted by Blackbird
oh and can anybody tell me what size pitch thread bolt I need for the brace.
I never got one.
I never got one.
Which end of the support brace do you need the bolt for? If it's for the oil pan side, Scott says he put one in the box when we sent you your pulley...
As far as the stop, Scott says it makes it easier to adjust the tension if following his instructions. and it protects the plastic pulley from getting hit with the tensioner. He also said it's possible that when ATI made that batch of main brackets that they weren't all made the same and the holes aren't in the middle...he suggested grinding the stop down a little narrower...
He also wanted me to ask you to send all the proto stuff back.
I'll follow up on your belt AGAIN...didn't realize it was going to take forever to get a damn belt to you!
KYLE...Scott needs the pieces you took off your setup back. Send 'em any way you want, just let me know how they're coming...where are YOUR pictures??!
Jeremy...
I had to use that pic! Just looked so cool! EVERYONE else with our setup...SEND ME YOUR PICTURES!! I can fit about 6 pictures and 2 videos on each customer's car section. Send some varied shots...burnout, outside of car, inside of car, whatever sets your car apart from others, engine pics, exhaust pics...
The blue car next to Jeremy's is Mike Busch's car...
Any comments on the new instructions? Has anyone followed them yet?
TECH Fanatic
Joined: Dec 2001
Posts: 1,220
Likes: 0
From: Germantown, MD
Am I the only one that can't figure out how to navigate to the instructions? I need instructions to get to the instructions :-p
Wendy, As soon as I get my setup I plan on taking video of what the tensioner does on the dyno so we can see the spring tensioner in action. I found the video of the cogs belt slipping absolutely amazing. wanna do something similar with the SD setup, but hopefully with out all the slip and nastiness
Mike
Wendy, As soon as I get my setup I plan on taking video of what the tensioner does on the dyno so we can see the spring tensioner in action. I found the video of the cogs belt slipping absolutely amazing. wanna do something similar with the SD setup, but hopefully with out all the slip and nastiness
Mike
On The Tree
Joined: Apr 2004
Posts: 196
Likes: 0
From: northeast
Originally Posted by buschman
Am I the only one that can't figure out how to navigate to the instructions? I need instructions to get to the instructions :-p
Wendy, As soon as I get my setup I plan on taking video of what the tensioner does on the dyno so we can see the spring tensioner in action. I found the video of the cogs belt slipping absolutely amazing. wanna do something similar with the SD setup, but hopefully with out all the slip and nastiness
Mike
Wendy, As soon as I get my setup I plan on taking video of what the tensioner does on the dyno so we can see the spring tensioner in action. I found the video of the cogs belt slipping absolutely amazing. wanna do something similar with the SD setup, but hopefully with out all the slip and nastiness
Mike
Thread Starter
Joined: Aug 2002
Posts: 10,331
Likes: 1
From: San Antonio, TX
Originally Posted by SDCE
KYLE...Scott needs the pieces you took off your setup back. Send 'em any way you want, just let me know how they're coming...where are YOUR pictures??!
What pieces were you talking about... i talked to Scott this morning and he didnt say anything about pieces. My old tensioner??? Or the other pulley back to ATI????
Im up loading pics to my site to be hosted now so ill post them after lunch.
Kyle
Jeremy... I had to use that pic! Just looked so cool!
I had to use that pic! Just looked so cool! I have a ton more I just have to scrape em up. I hope to have video of the car this friday at the track.J
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo On The Tree
Joined: Apr 2004
Posts: 196
Likes: 0
From: northeast
Originally Posted by buschman
Am I the only one that can't figure out how to navigate to the instructions? I need instructions to get to the instructions :-p
Wendy, As soon as I get my setup I plan on taking video of what the tensioner does on the dyno so we can see the spring tensioner in action. I found the video of the cogs belt slipping absolutely amazing. wanna do something similar with the SD setup, but hopefully with out all the slip and nastiness
Mike
Wendy, As soon as I get my setup I plan on taking video of what the tensioner does on the dyno so we can see the spring tensioner in action. I found the video of the cogs belt slipping absolutely amazing. wanna do something similar with the SD setup, but hopefully with out all the slip and nastiness
Mike
It's amazing! I know we have vids of that stuff...I'll see if I can dig em up too...Can you send me the vid of the cog slip?
Did you find the instructions ok?
I'll send you the link if you need it! teehee..Have a good day!
Wendy
TECH Fanatic
Joined: Dec 2001
Posts: 1,220
Likes: 0
From: Germantown, MD
Originally Posted by SDCE
That's a good idea...we've done it on our dyno with other tensioners that we make for our Chryslers...if you could, you should do a before and after and really watch how much the belt jumps around in the before setup! It's amazing! I know we have vids of that stuff...I'll see if I can dig em up too...
Can you send me the vid of the cog slip?
Did you find the instructions ok? I'll send you the link if you need it! teehee..
Have a good day!
Wendy
It's amazing! I know we have vids of that stuff...I'll see if I can dig em up too...Can you send me the vid of the cog slip?
Did you find the instructions ok?
I'll send you the link if you need it! teehee..Have a good day!
Wendy
Here's the video of the cogs setup;
Cogs Tensioner
Yeah I found the one link. But your site could use some renovations, it can be a little tough to navigate at times. No biggie. I'd rather have a vendor that offers good products at good prices, than a snazzy website.
Mike