Forced Induction Superchargers | Turbochargers | Intercoolers

Weird compound boost question

Old Dec 2, 2015 | 10:23 PM
  #1  
ledzepp3's Avatar
Thread Starter
Launching!
iTrader: (1)
 
Joined: Dec 2014
Posts: 208
Likes: 0
Default Weird compound boost question

So this is just an idea... But I've never really seen it done.

I've seen people run compound boost setups with a turbo feeding into a roots or twin screw blower, but has anyone run a turbo into a centrifugal supercharger? It just seems like a weird concept but one that could have its merits, that you have double boost (assuming it would work) at the top of the rev range.
Reply
Old Dec 3, 2015 | 09:02 AM
  #2  
Meth Sled's Avatar
Launching!
iTrader: (1)
 
Joined: Feb 2015
Posts: 203
Likes: 0
From: Houston, Texas
Default

Sub'd! I've thought about this as well, makes me wonder if you can spin the centri. fast enough it'll start spinning the compressor wheel, in turn, spinning the exhaust wheel and thennnnn sucks exhaust out of the motor! Makes sense in my head, lol
Reply
Old Dec 3, 2015 | 05:22 PM
  #3  
stevieturbo's Avatar
9 Second Club
 
Joined: Nov 2003
Posts: 13,616
Likes: 185
From: Norn Iron
Default

You would not have double boost and really overall airflow will still be limited by whichever is creating the most airflow.

You twin charge so one type of boost will assist where the other might lack, so in the case of turbos and centri you'd maybe want to use very small turbos and blow the centri through them.

Turbos take care of the low end, centri takes care of the top.

Or with much larger turbos the centri wil take care of low-mid ( yes they dont make much boost, but they still help the engine make power ) with larger turbos taking over to make power up top, with the turbos blowing through the centri this time

Or blow a centri through a Rootes like this

Reply
Old Dec 3, 2015 | 11:19 PM
  #4  
ledzepp3's Avatar
Thread Starter
Launching!
iTrader: (1)
 
Joined: Dec 2014
Posts: 208
Likes: 0
Default

It seems like without pushing ridiculous amounts of boost, the parasitic loss of running a double blower (centrifugal and twin-screw) wouldn't be worth it.. I was just curious as to why nobody turbos into a centrifugal blower, but what would be the benefits of putting something like a ProCharger onto a twin-screw?
Reply
Old Dec 4, 2015 | 12:03 AM
  #5  
RonA's Avatar
Launching!
iTrader: (1)
 
Joined: Oct 2013
Posts: 285
Likes: 0
From: Browns Valley, CA
Default

This one's a bit different.
Attached Thumbnails Weird compound boost question-att_1424464261663_20140228_220935.jpg  
Reply
Old Dec 4, 2015 | 04:14 AM
  #6  
stevieturbo's Avatar
9 Second Club
 
Joined: Nov 2003
Posts: 13,616
Likes: 185
From: Norn Iron
Default

Originally Posted by ledzepp3
It seems like without pushing ridiculous amounts of boost, the parasitic loss of running a double blower (centrifugal and twin-screw) wouldn't be worth it.. I was just curious as to why nobody turbos into a centrifugal blower, but what would be the benefits of putting something like a ProCharger onto a twin-screw?

On a twin screw, probably none.

But on a far less efficient Rootes like in the video which are crap at higher rpm or boost its more obvious why.

Still more of a novelty in reality though

Last edited by stevieturbo; Dec 4, 2015 at 09:16 AM.
Reply
Old Dec 4, 2015 | 08:23 AM
  #7  
1CAMWNDR's Avatar
TECH Veteran
iTrader: (21)
 
Joined: Nov 2001
Posts: 4,247
Likes: 2
Default

Originally Posted by RonA
This one's a bit different.
That is the way it really should be done. F1 or similar centrifugal overdriven to make boost just off idle feeding a larger turbocharger. Seen this done on several diesels with good results. Will it work for a gas engine? Don't know. Is it any better that a properly sized single or twin turbocharger? Doubt it.
Reply
Old Dec 4, 2015 | 09:18 AM
  #8  
stevieturbo's Avatar
9 Second Club
 
Joined: Nov 2003
Posts: 13,616
Likes: 185
From: Norn Iron
Default

Originally Posted by 1CAMWNDR
That is the way it really should be done. F1 or similar centrifugal overdriven to make boost just off idle feeding a larger turbocharger. Seen this done on several diesels with good results. Will it work for a gas engine? Don't know. Is it any better that a properly sized single or twin turbocharger? Doubt it.
That's a large blower feeding a small turbo, the turbo will be providing the low end, with the big Procharger taking over up top.
Reply
LS1 Tech Stories

The Best V8 Stories One Small Block at Time

story-0

Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin

 Verdad Gallardo
story-1

6 Common C5 Corvette Failures and What's Involved In Repairing Them

 Pouria Savadkouei
story-2

Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph

 Verdad Gallardo
story-3

Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked

 Pouria Savadkouei
story-4

Top 10 Most Powerful Chevy Trucks Ever Made!

 
story-5

Hennessey's New Supercharged Silverado ZR2 Has 700 HP

 Verdad Gallardo
story-6

Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes

 Verdad Gallardo
story-7

Awesome K5 Blazer Restomod Comes With C7 Corvette Power

 Verdad Gallardo
story-8

10 Camaros You Should Never Buy

 
story-9

10 LS Engine Myths That Refuse to Die

 Verdad Gallardo
Old Dec 4, 2015 | 11:45 AM
  #9  
JoeNova's Avatar
Restricted User
 
Joined: Mar 2014
Posts: 7,192
Likes: 109
From: Ohio
Default

A while back, Hellion pushed twins though a blower (can't remember if roots or screw). Made like 1100 wheel at 44 PSI. The turbos alone made 1000 at 26 PSI. The blower was just super-heating the air

Most big power compound guys run a turbo into a turbo. This is how the diesel guys hit 80-100 PSI.

Last edited by JoeNova; Dec 4, 2015 at 01:42 PM.
Reply
Old Dec 4, 2015 | 12:51 PM
  #10  
zrultima's Avatar
TECH Apprentice
 
Joined: Aug 2008
Posts: 369
Likes: 0
From: Greensboro NC or Miami Fl
Default

Originally Posted by JoeNova
A while back, Hellion pushed twins though a blower (can't remember if roots or screw). Made like 1100 wheel at 44 PSI. The turbine alone made 1000 at 26 PSI. The blower was just super-heating the air

Most big power compound guys run a turbo into a turbo. This is how the diesel guys hit 80-100 PSI.
Yeah i can tell you from experience i have a 63mm feeding my s480 in my truck i can hit 70 psi easy. But i keep blowing boots
Reply
Old Dec 4, 2015 | 02:43 PM
  #11  
stevieturbo's Avatar
9 Second Club
 
Joined: Nov 2003
Posts: 13,616
Likes: 185
From: Norn Iron
Default

Originally Posted by JoeNova
A while back, Hellion pushed twins though a blower (can't remember if roots or screw). Made like 1100 wheel at 44 PSI. The turbos alone made 1000 at 26 PSI. The blower was just super-heating the air

Most big power compound guys run a turbo into a turbo. This is how the diesel guys hit 80-100 PSI.
Compound is largely for boost multiplication though which isnt something you need on a spark ignition engine for the most part.

Using 2 different types or sizes of FI on an SI engine are generally to give a better spread of power over as wide an operating range as possible.

SO perhaps thread title is a little wrong for how it should be implemented here
Reply
Old Dec 4, 2015 | 03:47 PM
  #12  
1CAMWNDR's Avatar
TECH Veteran
iTrader: (21)
 
Joined: Nov 2001
Posts: 4,247
Likes: 2
Default

Originally Posted by stevieturbo
That's a large blower feeding a small turbo, the turbo will be providing the low end, with the big Procharger taking over up top.
Aha! OK then.
Reply
Old Dec 5, 2015 | 12:54 AM
  #13  
chuntington101's Avatar
TECH Addict
 
Joined: Aug 2004
Posts: 2,866
Likes: 4
Default

Volvo has done some very interesting stuff around this recently. On their Diesel engines they are looking to use compressed air injected into the exhaust manifold to help spool the turbo(s) quicker. On their spark engines they are using an electric supercharger to supplement the turbos down low.

BMW tend to go for sequential turbos and their latest diesels are tuning 3! That's one large on and two smaller units. One small one at low rpm and then the big one and the nice smaller on right at the top.

Porsche have don't VNT turbos but are probably just selecting a better matched turbo with the next 911 engine (that is turbo'ed).

Again it all depends on what you are trying to achieve. Do you really want supper low end boost? If so drop a heartbeat or whipple on the car and be done. If you want mid to top end power look at turbo(s) or centri supercharger.

The reason the diesel guys are doing it is they want over 100psi manifold pressures. That's around 8 time atmospheric pressure at sea level! A single state turbo can probably get you around 4 times atmospheric efficiently. So you need at least two stages to get you to target boost.
Reply
Old Dec 5, 2015 | 04:09 AM
  #14  
stevieturbo's Avatar
9 Second Club
 
Joined: Nov 2003
Posts: 13,616
Likes: 185
From: Norn Iron
Default

Some modern Porsches do have VNT

That or staged sequential probably are the future whilst keeping costs and reliability viable.
Reply
Old Dec 5, 2015 | 11:04 AM
  #15  
chuntington101's Avatar
TECH Addict
 
Joined: Aug 2004
Posts: 2,866
Likes: 4
Default

I don't know steve, these electric superchargers seem to be making some progress. Then there is the KERS style systems used on the Hyper cars. These are the real answer but probably some time away from mainstream use.
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 11:26 PM.

story-0
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin

Slideshow: This heavily modified 1971 Camaro mixes classic muscle car styling with a fifth-generation Camaro interior and modern LS3 power.

By Verdad Gallardo | 2026-05-12 18:06:42


VIEW MORE
story-1
6 Common C5 Corvette Failures and What's Involved In Repairing Them

Slideshow: From wobbling harmonic balancers to failed EBCMs, these are the issues that define long-term C5 ownership and what repairs typically involve.

By Pouria Savadkouei | 2026-05-07 18:44:57


VIEW MORE
story-2
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph

Slideshow: A modern Camaro transformed into a retro icon, this limited-run "Bandit" build blends nostalgia with brute force in a way few revivals manage.

By Verdad Gallardo | 2026-04-21 13:57:02


VIEW MORE
story-3
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked

Slideshow: Cadillac didn't just crash the high-performance luxury vehicle party, it showed up loud, supercharged, and occasionally a little unhinged...

By Pouria Savadkouei | 2026-04-16 10:05:15


VIEW MORE
story-4
Top 10 Most Powerful Chevy Trucks Ever Made!

Slideshow: Top ten most powerful Chevy trucks ever made

By | 2026-03-25 09:22:26


VIEW MORE
story-5
Hennessey's New Supercharged Silverado ZR2 Has 700 HP

Slideshow: Hennessey has turned the Silverado ZR2 into a 700-hp off-road monster with supercharged V8 power and a limited production run.

By Verdad Gallardo | 2026-03-24 18:57:52


VIEW MORE
story-6
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes

Slideshow: A one-off sports car that looks like a vintage Italian exotic-but hides a C6 Corvette underneath-just sold for the price of a new mid-engine Corvette.

By Verdad Gallardo | 2026-03-23 18:53:41


VIEW MORE
story-7
Awesome K5 Blazer Restomod Comes With C7 Corvette Power

Slideshow: A heavily reworked 1972 K5 Blazer swaps its off-road roots for a low-slung street-focused build with modern V8 power.

By Verdad Gallardo | 2026-03-09 18:08:45


VIEW MORE
story-8
10 Camaros You Should Never Buy

Slideshow: There are thousands of used Camaros on the market but we think you should avoid these 10

By | 2026-02-17 17:09:30


VIEW MORE
story-9
10 LS Engine Myths That Refuse to Die

Slideshows: Which one of these myths do you believe?

By Verdad Gallardo | 2026-01-28 18:10:11


VIEW MORE