Forced Induction Superchargers | Turbochargers | Intercoolers

need some help (boosted noob questions)

Thread Tools
 
Search this Thread
 
Old 03-27-2016, 05:24 PM
  #1  
On The Tree
Thread Starter
 
boostedxs's Avatar
 
Join Date: Jan 2015
Posts: 123
Likes: 0
Received 0 Likes on 0 Posts
Default need some help (boosted noob questions)

Okay so I don't post on here much but I do read a ton. I'm not new to ls engines but I'm a total noob when it comes to boosted ls motors. that being said, car is an 01 ss 6 speed, l33, huron speed v2 t4 kit, using stock ls6 intake man. and need some advice on few things with the intake going back on. first question is about the evap solenoid. I've read by searching that I can remove evap all together and have it tuned out on the pcm. if so, I just plug the tube by the throttle body? also. I read some thing about people using some kind of filter on the tube coming from the charcoal canister to prevent fumes? question two is the small nipple coming from the back of the intake. one goes to the passenger side (I followed it and it's going to what looks like a vaccuume reservoir by the coolant reservoir? another nipple goes to the drivers side to some sort of plug in on the top of the intake manifold. my question is are these needed? and if so, do I need to do anything with then for when lines are under boost? any input is greatly appreciated!
Attached Thumbnails need some help (boosted noob questions)-20160327_111519.jpg  
Old 03-27-2016, 05:27 PM
  #2  
On The Tree
Thread Starter
 
boostedxs's Avatar
 
Join Date: Jan 2015
Posts: 123
Likes: 0
Received 0 Likes on 0 Posts
Default

this is the one that I have no clue what it even is..
Attached Thumbnails need some help (boosted noob questions)-20160327_111528.jpg  
Old 03-27-2016, 05:29 PM
  #3  
On The Tree
Thread Starter
 
boostedxs's Avatar
 
Join Date: Jan 2015
Posts: 123
Likes: 0
Received 0 Likes on 0 Posts
Default

And this is the evap solenoid? was wanting to remove all this ruckus if it's doable
Attached Thumbnails need some help (boosted noob questions)-20160327_111535.jpg  
Old 03-28-2016, 02:57 AM
  #4  
TECH Regular
iTrader: (8)
 
klinznilk's Avatar
 
Join Date: Apr 2015
Location: Iowa
Posts: 490
Received 27 Likes on 22 Posts
Default

The second picture looks like part of the AIR Pump stuff??
Old 03-28-2016, 06:33 AM
  #5  
On The Tree
Thread Starter
 
boostedxs's Avatar
 
Join Date: Jan 2015
Posts: 123
Likes: 0
Received 0 Likes on 0 Posts
Default

You could be right, If i knew for sure I wouldn't be asking haha but as far as I know I haven't seen any air pump anywhere on this thing. I'm mostly asking all this to hopefully get rid of items to clear my engine bay up a bit, and also I don't want any unnecessary lines on my intake while under boost just a greater chance for leaks or blow a line off
Old 03-28-2016, 06:39 AM
  #6  
On The Tree
Thread Starter
 
boostedxs's Avatar
 
Join Date: Jan 2015
Posts: 123
Likes: 0
Received 0 Likes on 0 Posts
Default

heres my motor as of now. im pretry sure some cats on here have done what im asking about, just waiting for some sound advice so I can get her finished up. I know I can delete the evap but was curious about what exactly to do with the line to prevent fumes ..ahhh!
Attached Thumbnails need some help (boosted noob questions)-20160327_123855.jpg  
Old 03-28-2016, 07:31 AM
  #7  
Restricted User
 
JoeNova's Avatar
 
Join Date: Mar 2014
Location: Ohio
Posts: 7,194
Received 104 Likes on 87 Posts
Default

Run the evap line to a charcoal canister.
Old 03-28-2016, 11:04 AM
  #8  
On The Tree
Thread Starter
 
boostedxs's Avatar
 
Join Date: Jan 2015
Posts: 123
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by JoeNova
Run the evap line to a charcoal canister.
evap line is alreday ran to charcoal canister above the tank? that's what I'm wanting to get rid of. atleast get rid of the lines on top of my intake man.. I'm not worried about the canister staying



Quick Reply: need some help (boosted noob questions)



All times are GMT -5. The time now is 03:11 PM.