underdrive pulley and turbo
#1
underdrive pulley and turbo
Got my drain welded in the timing cover and i already had a powerbond underdrive pulley so the fitting cleared perfectly. Now the issue is, I was recently told by "someone" who worked at ATI that underdrive pulleys are no good with boost. Now first thing I thought was, eh sounds like BS, BUT I rather spend a couple of minutes researching this before I discard it. Unfortunately, didn't come up with anything. Anyone here have any experience with this?
Thanks
Thanks
#4
12 Second Club
iTrader: (13)
I would have to say that taking advice from a specific company that says "Oh, all of the other competing products are bad" is generally a pretty biased opinion. lol. So good idea on researching. I too am making 931whp on a cheap 25% ASP underdrive pulley. Should be fine.
#6
TECH Fanatic
#7
Wow glad to hear these answers. I was told because you have less mass to dampen the cranks vibrations due to the extra power I might break my timing chain, oil pump, or even snap the crank. Did further research and found that my pb underwrite pulley is heavier than stock so I feel a little better now.