New Nova Intercooler
Thread Starter
Joined: Aug 2011
Posts: 4,729
Likes: 814
From: Portland, OR
New Nova Intercooler I can't imbed thanks to photo bucket-o-crap, but you should be able to see the attachment.
I'll install the grille and bumper etc tomorrow. Some trimming, ok, a lot, was required.
Ron
I'll install the grille and bumper etc tomorrow. Some trimming, ok, a lot, was required.
Ron
Was there a car behind that IC'er, lol-that is huge, is it a 12" high core, that should move some air, and hopefully not run hot at an idle.
Be interesting to see how it all fits, how it works. Starting a new build on a 74, debating an IC'er vs just a meth kit.
Be interesting to see how it all fits, how it works. Starting a new build on a 74, debating an IC'er vs just a meth kit.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Thread Starter
Joined: Aug 2011
Posts: 4,729
Likes: 814
From: Portland, OR
12x18". 4" thick.
ETS core.
My IAT's were hitting 180, so this should help. And yes, I had a little 6x18 Treadstone.
I'm a bit concerned about cooling, but I have a 160 thermo, big radiator and pcm controlled Corvette/Camaro fans. I guess I'll be the first to know.
It's more race car than street car, so it's not like I cruise around in 100 heat. Although I'll test that.
ID1300's arrive next week. I'll be able to turn things up a bit.
Thanks for the imbed tip!
Ron
ETS core.
My IAT's were hitting 180, so this should help. And yes, I had a little 6x18 Treadstone.
I'm a bit concerned about cooling, but I have a 160 thermo, big radiator and pcm controlled Corvette/Camaro fans. I guess I'll be the first to know.
It's more race car than street car, so it's not like I cruise around in 100 heat. Although I'll test that.
ID1300's arrive next week. I'll be able to turn things up a bit.
Thanks for the imbed tip!
Ron
Thread Starter
Joined: Aug 2011
Posts: 4,729
Likes: 814
From: Portland, OR
Here is the final photo.
Pure stealth right? Ha!
But it fits.
The area behind the license plate is cut out and the plate spaced out 1/2" which should allow a bit more airflow.
https://ls1tech.com/forums/attachmen...1&d=1499559285
Thanks for the comments!
I have no clue how to embed.......old fart, I forgot.
Ron
Pure stealth right? Ha!
But it fits.
The area behind the license plate is cut out and the plate spaced out 1/2" which should allow a bit more airflow.
https://ls1tech.com/forums/attachmen...1&d=1499559285
Thanks for the comments!
I have no clue how to embed.......old fart, I forgot.
Ron
Really nice. Bet that will be a huge improvement. I see the trimming on the grill. I had to remove similar areas of on mine as well. I saw a Nova the other day that had the front bumper opened up where the license plate is. Might be another option to increase airflow if you don't have to have front plates
Edit:. Oops, missed your comment about trimming around the front plate
Edit:. Oops, missed your comment about trimming around the front plate
Last edited by blu72nova; Jul 8, 2017 at 10:13 PM. Reason: Update
