When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Yes sir. A tick under 1400 needs windshield to be complete. Hatch was on the roof during weight. Also, side ground effects were not in that weight no motor, tranny, electronics
Last edited by MIAmotorsports; 05-01-2018 at 02:51 PM.
Put narrower tires on to get the tire inside the lip of the wheelwell. I can put motor and tranny in now without messing up the front. Still going to trim the inside lip. I think I can get 3/4 to 1/2 in. more clearance cutting the lip off.
Got the bullet lower on and it dropped the height down ALOT and looks great so it's a win...win. Wins have been few and far between with this biotch of a build.
First pic is with holley high ram and second pic is the 417 lower. All I need is a valley cover and done.
Looks mighty hungry! Your really narrowing in now, how long before you light it up?
August or September. It needs to be completely rewired and stuff powder coated and ceramic coated one the cold side and exhaust is done. There is still a tone of little stuff0
So far it is 1954lbs with motor, complete trans, and torque converters, fuel cell, 8 gallon water tank, and fuel lines. All that is left is turbo and piping,, fuel pump, lines for water tank.