New BTR CAST INTAKE
#87
FormerVendor
iTrader: (13)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
These intakes will be hitting the market as soon as possible.. Just a little more time and testing to ensure we produce maximum gains. It will be available in cathedral and square port. The price point is going to be between 6xx-7xx range....
look forward to this product dropping sometime in july/august !
Hope you guys are ready to make some BTR jam
Travis@briantooleyracing.com
look forward to this product dropping sometime in july/august !
Hope you guys are ready to make some BTR jam
Travis@briantooleyracing.com
The following users liked this post:
Rickys2003svt.cobra (02-04-2021)
#97
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Because that's the type of clientele that this type of intake is designed for. Much like heads that flow 400cfm wouldn't be marketed to people who are still running a stock camshaft and are using 87 octane gas.
#98
10 Second Club
iTrader: (8)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I don't think that's it. Not with it designed to fit under a f car cowl. I could see a good cam only car-h/c car benefiting from a intake like this. It should carry rpm better than the current offerings. Solid higher rpm intake offerings are what's really holding back alot of these cars from goin over 500whp.
#99
9 Second Club
#100
9 Second Club
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I don't think that's it. Not with it designed to fit under a f car cowl. I could see a good cam only car-h/c car benefiting from a intake like this. It should carry rpm better than the current offerings. Solid higher rpm intake offerings are what's really holding back alot of these cars from goin over 500whp.
As much as I like the design of a dual plenum, I just cant see this intake performing miracles in a n/a application compared to what is already out there.