wastegates
It really depends on your packaging situation. For me, i have a twin scroll housing and my hotside if completely divided. I decided to just run twin gates to package everything easier. Works fine. There is some redundancy built in, but it also complicates things.
Thread Starter
TECH Apprentice
Joined: Jul 2017
Posts: 312
Likes: 14
From: Stephens city VA
two 2.5 in pipes for the merge . im thinking it will be easier to run two 38 mm wastegates then build my own merge .
you can also put 1 gate on the housing. A lot of guys do that
Thread Starter
TECH Apprentice
Joined: Jul 2017
Posts: 312
Likes: 14
From: Stephens city VA
I run the same merge. I ran for a while with 1 44mm on 1 bank, worked great, I could run 4 psi if I wanted. I recently built a merge for my wastegate to hook it to both banks, I can't tell a difference it seems the same. But I also have a tiny turbine atm, so a lot of back pressure.
you can also put 1 gate on the housing. A lot of guys do that
you can also put 1 gate on the housing. A lot of guys do that
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
TECH Regular
Joined: Dec 2018
Posts: 456
Likes: 14
From: MIAMI
i wanted to run 1 waste gate just because its a single piece. but i always debate what would be cheaper and better.
im not at the point of fabbing yet ( waiting for my painter to paint the goddamn bay ) but when the times comes ill see where goes what!
i kinda wanted a 3 to 1 t4 flange but no one makes that lol
im not at the point of fabbing yet ( waiting for my painter to paint the goddamn bay ) but when the times comes ill see where goes what!
i kinda wanted a 3 to 1 t4 flange but no one makes that lol
TECH Regular
Joined: Dec 2018
Posts: 456
Likes: 14
From: MIAMI
not bad at all! i had a buddy with a 4.great and that cam and springs ( same im running in my 5.3) but he had a 7875 and e85 and he made i believe 510 on 8 psi or 10? i dont remember
Joined: Mar 2007
Posts: 1,145
Likes: 51
From: Saskatchewan, Canada - where arguing "DA" is for the slow and weak...
I ran a 60mm gate of a 3" pipe after the merge. This was all to do with packaging, weight, and not having it dump to atmosphere.
https://ls1tech.com/forums/forced-in...l#post19985279
https://ls1tech.com/forums/forced-in...l#post19985279
Joined: Mar 2007
Posts: 1,145
Likes: 51
From: Saskatchewan, Canada - where arguing "DA" is for the slow and weak...
