Forced Induction Superchargers | Turbochargers | Intercoolers

new nova build thread.

Thread Tools
 
Search this Thread
 
Old 10-26-2019 | 07:03 PM
  #81  
yenkomike's Avatar
Thread Starter
9 Second Club
iTrader: (2)
 
Joined: Aug 2013
Posts: 1,415
Likes: 181
From: oxford mi
Default

well I made it to the dyno. first hit was a 619 hp at 10 psi boost. made a few more pulls turning it up



until I ran out of fuel with my single aem 400 pump . good to about 14 psi boost.
The following users liked this post:
truckdoug (10-27-2019)
Old 10-27-2019 | 07:01 AM
  #82  
forcd ind's Avatar
TECH Veteran
15 Year Member
iTrader: (7)
 
Joined: Sep 2007
Posts: 4,142
Likes: 246
From: woodbine, md
Default

Good power, surprised the pump was running out, E85 I guess. Your engine is sim. to mine,
I was hoping to get into the 600 range, up to 10#'s on the street, just cant use it with an open rear, lol.
Old 10-27-2019 | 07:35 AM
  #83  
yenkomike's Avatar
Thread Starter
9 Second Club
iTrader: (2)
 
Joined: Aug 2013
Posts: 1,415
Likes: 181
From: oxford mi
Default

yes e85. it made 705 @ 14 psi boost but was loosing afr due to loosing fuel pressure. and I don't want to add fuel in the table to make up for a maxed out pump just for a little more power. first pull was a little rich and timing is in the 15* range. made 619 hp 1st pull. I cleaned it up and it made 624 on 10.6 psi boost. then added a manual controller. very happy with it for the very first runs thru a 400th.
The following 3 users liked this post by yenkomike:
Dragframe (10-27-2019), forcd ind (10-27-2019), truckdoug (10-27-2019)
Old 10-27-2019 | 11:28 AM
  #84  
3 window's Avatar
TECH Addict
iTrader: (1)
 
Joined: Aug 2014
Posts: 2,051
Likes: 187
Default

What RPM were you seeing peak torque and power? Just wondering how the sheet metal intake’s workin out. Nice numbers BTW.
Old 10-27-2019 | 12:03 PM
  #85  
yenkomike's Avatar
Thread Starter
9 Second Club
iTrader: (2)
 
Joined: Aug 2013
Posts: 1,415
Likes: 181
From: oxford mi
Default

i only ran it to 6000. with one fuel pump. but max hp was 705.60 at 5810 rpm and 646.76 torque at 5640 rpm.
Old 10-27-2019 | 12:07 PM
  #86  
yenkomike's Avatar
Thread Starter
9 Second Club
iTrader: (2)
 
Joined: Aug 2013
Posts: 1,415
Likes: 181
From: oxford mi
Default

wish I could turn this. but here. is all 5 runs. lower 2 are 10.5 psi last 3 are 14.1 psi avg





Old 11-01-2019 | 09:57 AM
  #87  
yenkomike's Avatar
Thread Starter
9 Second Club
iTrader: (2)
 
Joined: Aug 2013
Posts: 1,415
Likes: 181
From: oxford mi
Default

doing body work now. couldn't stand the white any longer. im painting it hugger orange.
Old 11-01-2019 | 09:51 PM
  #88  
truckdoug's Avatar
TECH Senior Member
10 Year Member
iTrader: (26)
 
Joined: Nov 2013
Posts: 6,336
Likes: 528
From: Portlandia
Default

Old 11-01-2019 | 09:51 PM
  #89  
truckdoug's Avatar
TECH Senior Member
10 Year Member
iTrader: (26)
 
Joined: Nov 2013
Posts: 6,336
Likes: 528
From: Portlandia
Default

nice numbers btw!
Old 11-02-2019 | 07:07 AM
  #90  
forcd ind's Avatar
TECH Veteran
15 Year Member
iTrader: (7)
 
Joined: Sep 2007
Posts: 4,142
Likes: 246
From: woodbine, md
Default

Thanks Doug, I got tired of turning my mont. sideways, lol. Now if I could just make it larger.
Hugger orange is a great color, but so many variations of it.
Old 11-02-2019 | 07:23 AM
  #91  
yenkomike's Avatar
Thread Starter
9 Second Club
iTrader: (2)
 
Joined: Aug 2013
Posts: 1,415
Likes: 181
From: oxford mi
Default

yes I went with a more red look I don't want traffic cone orange. thanks for turning that I tried to do that for a while but I whoud'nt work. car is torn down but im hoping to get it ready so I can paint it in a couple weeks. thanksgiving at the latest.

very happy with the power. with a second pump and some tuning im sure it will be in the mid 800s by 18-20 psi boost.
Old 11-03-2019 | 10:35 AM
  #92  
yenkomike's Avatar
Thread Starter
9 Second Club
iTrader: (2)
 
Joined: Aug 2013
Posts: 1,415
Likes: 181
From: oxford mi
Default

well getting the body work done. rewelding some stuff. 27 dents later and still not ready for primer. not to mention the garage is wrecked.


The following users liked this post:
Bad Apache (11-03-2019)
Old 11-22-2019 | 06:58 AM
  #93  
yenkomike's Avatar
Thread Starter
9 Second Club
iTrader: (2)
 
Joined: Aug 2013
Posts: 1,415
Likes: 181
From: oxford mi
Default

well I changed my mind. dark shadow grey.



The following 5 users liked this post by yenkomike:
3 window (11-22-2019), Bad Apache (11-22-2019), forcd ind (11-22-2019), Tone-NY (11-23-2019), truckdoug (11-23-2019)
Old 11-22-2019 | 05:16 PM
  #94  
3 window's Avatar
TECH Addict
iTrader: (1)
 
Joined: Aug 2014
Posts: 2,051
Likes: 187
Default

You don’t screw around. I dig the grey. Gonna look really nice all back together.
Old 11-22-2019 | 08:44 PM
  #95  
yenkomike's Avatar
Thread Starter
9 Second Club
iTrader: (2)
 
Joined: Aug 2013
Posts: 1,415
Likes: 181
From: oxford mi
Default

thanks .I was not to sure . was real close to going orange but the grey is nice. should have it mostly together . all but what I leave off until I wet sand and wheel it out. I have some time off over turky day so im going to get it done next week.
Old 11-23-2019 | 09:59 AM
  #96  
truckdoug's Avatar
TECH Senior Member
10 Year Member
iTrader: (26)
 
Joined: Nov 2013
Posts: 6,336
Likes: 528
From: Portlandia
Default

damn that color looks great on that body style
Old 11-23-2019 | 11:17 AM
  #97  
yenkomike's Avatar
Thread Starter
9 Second Club
iTrader: (2)
 
Joined: Aug 2013
Posts: 1,415
Likes: 181
From: oxford mi
Default





Old 11-23-2019 | 11:18 AM
  #98  
yenkomike's Avatar
Thread Starter
9 Second Club
iTrader: (2)
 
Joined: Aug 2013
Posts: 1,415
Likes: 181
From: oxford mi
Default


The following users liked this post:
truckdoug (11-23-2019)
Old 11-23-2019 | 11:31 AM
  #99  
47ford's Avatar
Launching!
 
Joined: Jun 2012
Posts: 249
Likes: 36
From: Pennsylvania
Default

How did you route your down pipe?
Old 11-23-2019 | 12:41 PM
  #100  
forcd ind's Avatar
TECH Veteran
15 Year Member
iTrader: (7)
 
Joined: Sep 2007
Posts: 4,142
Likes: 246
From: woodbine, md
Default

Looks good-I painted a chevelle years ago like a gold, after pushing it outside I hated the color, lol.


Quick Reply: new nova build thread.



All times are GMT -5. The time now is 07:04 PM.