Width of flowtech turbo headers installed
Width of flowtech turbo headers installed Can anyone that has a set of Flowtech turbo headers tell me the width of them installed at the widest point? I have a tight space and want to know. Or, if it's easier, a distance from a solid reference point like the top corner of the head.
Also, how far do they stick past the end of the head?
Thanks!
Also, how far do they stick past the end of the head?
Thanks!
Up/forward, or down/forward?
I have up/forward and can measure next Wednesday if you can wait that long. I’m sure others in here have them as well. Hope someone else chimes in.
I have up/forward and can measure next Wednesday if you can wait that long. I’m sure others in here have them as well. Hope someone else chimes in.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo If you have 32", they'll fit. Maybe 31 7/8", but you can expect them to hit if you're using engine mounts that flex.
Measured from the forward face of the respective cylinder head, to the face of the V-band flange;
Passenger side 8 3/4"
Driver side 6 1/4"
Good luck with your project.
Measured from the forward face of the respective cylinder head, to the face of the V-band flange;
Passenger side 8 3/4"
Driver side 6 1/4"
Good luck with your project.