Octane boosters in general.
TECH Enthusiast
Joined: Nov 2017
Posts: 661
Likes: 91
From: S.F. East bay
My math may be a little off to say 20 gals of 91 will be 99 with this stuff but the chart is there for anyone who wants to correct me….math was never my favorite subject unless im counting dollars
I have an 11.2:1 LSAblown LQ9 and on ca. 91 it is not happy, sounds like a bag of marbles when i get into boost…..so ive been using a bottle of Boostane Professional religiously for the past 4 yrs now at every fillup….night and day difference but i buy it by the case from summit for roughly $180 for a box of 6……it does begin to add up but it is cheaper than a new motor…with that said im just about done building my 10.1:1 408, when the weather changes i will be putting it in….but the 32oz bottle of boostane professional WORKS, i wish i only knew how to test it to see how much octane it really adds….according to the chart on the back of the bottle my 20gal tank of 91 becomes 97 ….i call BS but my bag of marbles says its not 91 anymore and the performance would land me at 95-95 if i had to guess….but 97… i wish i could verify
TECH Enthusiast
Joined: Nov 2017
Posts: 661
Likes: 91
From: S.F. East bay
On a LSA (zl1 lid) would the meth be injected on the intake (air filter) tube? Or wouldnt it have to be internally by the brick?? I thought about it but i just dont know enough to actually pull it off, wouldnt e-85 kinda have the same results as well?? I guess the meth would be easier and more cost effective, or am i trippin??..,,im all ears!!!
On a LSA (zl1 lid) would the meth be injected on the intake (air filter) tube? Or wouldnt it have to be internally by the brick?? I thought about it but i just dont know enough to actually pull it off, wouldnt e-85 kinda have the same results as well?? I guess the meth would be easier and more cost effective, or am i trippin??..,,im all ears!!!
https://fiinterchillers.com/product/...eth-injection/
https://prometh.com/products/copy-of...anol-injection
I'd give Julio at Alky Controls a shout too.
He's been using meth injection for decades, makes a great product and is fantastic to work with.
My brand-new tank had a hole in it, and he immediately sent me a new one, no questions asked.
He's been using meth injection for decades, makes a great product and is fantastic to work with.
My brand-new tank had a hole in it, and he immediately sent me a new one, no questions asked.
Thread Starter
Joined: May 2011
Posts: 8,485
Likes: 1,032
From: Wichita, KS
Def put in the research. I had heard at one point that meth/water pre blower on roots style stuff can mess up the coating on the rotors. May be a BS rumor, but worth checking into.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo Thread Starter
Joined: May 2011
Posts: 8,485
Likes: 1,032
From: Wichita, KS
Might have to get a universal kit and install the nozzles into the intake ports to avoid eating the coating. If there's enough room that is
