SDCE on the way
#1
TECH Regular
Thread Starter
iTrader: (5)
Join Date: Jul 2002
Location: Alabama
Posts: 486
Likes: 0
Received 0 Likes
on
0 Posts
SDCE on the way
My SDCE 8 rib set up is on the way and that makes me Any tips for for putting this bad boy on? I can't wait > I have had my P1SC for almost 2 years now and finally I will see some boost!!!!!!!!!
#2
TECH Fanatic
Join Date: Dec 2001
Location: Germantown, MD
Posts: 1,220
Likes: 0
Received 0 Likes
on
0 Posts
Did you order the tool? I don't even know why they make it an option. When you first look at it, it will make no since. But you'll get the hang of it. You have to install the bracket, then install the tensioner. Put some initial torque on the tensioner. I put about 7 1/2 lbs. Then route the belt, install the blower and put the belt on the tensioner. You should see 12-15 lbs. of torque on that belt and that should do it.
Mike
Mike
#3
TECH Senior Member
iTrader: (21)
Look at other people picturesw... and do what buschman said.... the tensioner can not be set with the blower on it must be set before...... I have pics on my site if u want them.. The tool is a must... what size blower pulley did you go with and how much boost do u want to see?
Kyle
Kyle
#4
TECH Regular
Thread Starter
iTrader: (5)
Join Date: Jul 2002
Location: Alabama
Posts: 486
Likes: 0
Received 0 Likes
on
0 Posts
I didn't ask about size details, but I want to make 8psi (for now). I'd love some pictures! My e-mail address prodrigues@hooters.com I did get the tool, I figured that I'd need it. I guess when I get the kit I'll understand what you are talking about when you say put tq on the belt. Thanks for all the feed back!
I'm so excited that I'll finally get my blower to kick some ***! 2 years is a long time to wait for something to work right!
I'm so excited that I'll finally get my blower to kick some ***! 2 years is a long time to wait for something to work right!
#5
TECH Senior Member
Join Date: Nov 2001
Location: Chi-Town, IL
Posts: 11,603
Likes: 0
Received 0 Likes
on
0 Posts
You will love it, I'm getting my F1 put on right now, so all the stuff should be ready in a week or two, I'll have some new #'s, and hopefully get it to the track this month
#6
TECH Senior Member
iTrader: (21)
Here ya go.........
Make sure you follow the directions and the belt has to go thru one brackets like in that last pic..... if you dont get directions by chance PM me and and PM you my cell number and i can walk you thru it like i did BOS... Ill se if i can dig up some more pics...
Kyle
Make sure you follow the directions and the belt has to go thru one brackets like in that last pic..... if you dont get directions by chance PM me and and PM you my cell number and i can walk you thru it like i did BOS... Ill se if i can dig up some more pics...
Kyle
Trending Topics
#8
TECH Fanatic
Join Date: Dec 2001
Location: Germantown, MD
Posts: 1,220
Likes: 0
Received 0 Likes
on
0 Posts
Oh yeah i forgot to mention, make sure you figure your belt path out BEFORE mounting the bracket. I can't tell you how many times I've pulled a homer and forgot to route the belt on the inside of one of the bracket supports. DOH!
Mike
Mike
#9
TECH Senior Member
iTrader: (21)
Yep... just like Mike siad..... take everything off and then get out the instructions and route the belt.... then mount the bracket back up with the spacers provided...... i had to go one more because the belt rubbed my thicker Steal bracket....... then mount the Spring tensioner and us the tool to get it to a setting you feel is right.. (this could take a few times of mounting the blower up and getting the belt on to get it where you like) but its not that hard...... Just take your time.
Kyle
Kyle
#12
TECH Senior Member
Join Date: Nov 2001
Location: Chi-Town, IL
Posts: 11,603
Likes: 0
Received 0 Likes
on
0 Posts
Dirty, I would like some more info from you as well, my blower is getting mounted up right now with my pulley setup, I'm curious as to what size your running, also, what is your fuel setup.....
Thanks
Thanks
#16
TECH Addict
iTrader: (14)
Join Date: Nov 2002
Location: hurst tx
Posts: 2,560
Likes: 0
Received 0 Likes
on
0 Posts
Just out of curiosity
does this SCDE stuff, solve the belt slip problem? is it an entire kit to convert to 8 rib? or does it still use the 6 rib? and are yall getting by with the stock bracket or still afterkmarketo ones?
and about how much does this cost? if someone were to buy a D1 kit used, what would be needed to make it crank out about 15psi?
thanks
ed
firebird455@onebox.com
does this SCDE stuff, solve the belt slip problem? is it an entire kit to convert to 8 rib? or does it still use the 6 rib? and are yall getting by with the stock bracket or still afterkmarketo ones?
and about how much does this cost? if someone were to buy a D1 kit used, what would be needed to make it crank out about 15psi?
thanks
ed
firebird455@onebox.com
#17
TECH Senior Member
iTrader: (21)
Ed,
Yes Yes Yes the SDCE kit DOES stop the belt slip problem..... There is a kit to convert your stock rib setup to a spring tensioner, but i didnt want to do that i wanted a 8 rib setup for pushing the system harder down the line.... I am using a aftermarket STEEL bracket ($200), but alot of people are using there one that came with the kit.... you have to send your bracket is so Scott @SCDE can modify it. I believe it $700 for the 8 rib spring tensioner setup.... alot of us got in it when they had a GP going on.... who knows maybe you can start another one...... If you were trying to reach 15psi 8 rib is the only way to go.... PM BOS he had another 8 rib setup before and a cog setup and couldnt get either work..... now he has the SDCE 8 rib setup like me and FRCEFED and we are all very happy with it... its one of the best if not the best blower mod i have done yet.....
Kyle
Yes Yes Yes the SDCE kit DOES stop the belt slip problem..... There is a kit to convert your stock rib setup to a spring tensioner, but i didnt want to do that i wanted a 8 rib setup for pushing the system harder down the line.... I am using a aftermarket STEEL bracket ($200), but alot of people are using there one that came with the kit.... you have to send your bracket is so Scott @SCDE can modify it. I believe it $700 for the 8 rib spring tensioner setup.... alot of us got in it when they had a GP going on.... who knows maybe you can start another one...... If you were trying to reach 15psi 8 rib is the only way to go.... PM BOS he had another 8 rib setup before and a cog setup and couldnt get either work..... now he has the SDCE 8 rib setup like me and FRCEFED and we are all very happy with it... its one of the best if not the best blower mod i have done yet.....
Kyle