SD CONCEPTS support bracket
Thread Starter
Teching In
Joined: Sep 2004
Posts: 17
Likes: 0
SD CONCEPTS support bracket I have installed the sd concepts 8 rib setup. 
It took a long time, but should be worth it. My question is where does the support bracket go that connects to the oil pan? Can someone decribe where it attaches or maybe a pic of where it goes? I checked the webpage and the pictures will not pull up.
Thanks.
It took a long time, but should be worth it. My question is where does the support bracket go that connects to the oil pan? Can someone decribe where it attaches or maybe a pic of where it goes? I checked the webpage and the pictures will not pull up.Thanks.
Yep right too the corner of the oilpan(driverside front of the pan). There is a threaded hole that it will bolt right up too(the flat side of the bracket goes to the pan) I'll see if I have any pics here on the HD, but you should be able to spot it now.
What braided line???
??? I see no braided line in said picture???
thats from my old TNT dry kit a few months back. I still getting some odds and ends for my new wet kit
now back on topic
??? I see no braided line in said picture??? thats from my old TNT dry kit a few months back. I still getting some odds and ends for my new wet kitnow back on topic
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
this setup rules. the belt that has been on bos's car is the original one he put in when he istalled it over the summer. And he hasnt been nice to that belt either. it has endured though many dyno pulls and a few track passes and then some more pulls with the new setup. if i was to ever build a blower setup i would only use the sdce setup. to bad i prefer beltless boost
if i was to ever build a blower setup i would only use the sdce setup. to bad i prefer beltless boost 