Rear Mount Guys...Look in here
Thread Starter
On The Tree
Joined: Dec 2004
Posts: 123
Likes: 0
From: KCMO
Rear Mount Guys...Look in here So I finally got all of my kit put together and stuff...But I hardley have any ground clearence. Is this normal. The main parts that scrape are the piece going under the a arm by the cat, and a piece hangs low right before it goes over the axle. Do you guys hang low, I dont want to scrape everytime I drive. I want to be able to drive normal.
That was one of my biggest things with the STS kit... I took out my lowering springs and I still smacked the crap out of everything. I finally got so frusterated I went a different direction with the car.
I've scraped the front pipe a few times but I've never scraped the one in front of the drivers tire. My car is lowered as well. Honestly I think it looks worse than it really is. Just don't try to speed over bumps.
Trending Topics
only thing that really scrapes on my STS setup is my damn SLP LONG TUBES!
Once in a while i'll get the pipe by the rear lower control arm because mine goes under the axle vs over (should be changed this week though).
Once in a while i'll get the pipe by the rear lower control arm because mine goes under the axle vs over (should be changed this week though).
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
