E boost 2 problem STS
#21
TECH Addict
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
ohhhhhhh man I am reading the manual again...
******
The boost set point values can be set from 0-99 and is NOT directly related to
an actual boost pressure. Boost pressure is set by increasing or decreasing the value of each of the three boost set points.
*******
USER ERROR!!!!!
Dohhhhhhhhhhhhh!
******
The boost set point values can be set from 0-99 and is NOT directly related to
an actual boost pressure. Boost pressure is set by increasing or decreasing the value of each of the three boost set points.
*******
USER ERROR!!!!!
Dohhhhhhhhhhhhh!
#24
TECH Addict
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
well your wastegate spring is 5lbs, assuming it's the stock wastegate they usually ship.
so set everything to 0 on the eboost and all you should see if 5psi.
or simply turn it off if there is an on/off switch
so set everything to 0 on the eboost and all you should see if 5psi.
or simply turn it off if there is an on/off switch