Any interest in ATI brackets?
Thread Starter
On The Tree
Joined: Jun 2002
Posts: 196
Likes: 0
From: Sacramento
Any interest in ATI brackets? Hi,
I'm thinking about making an ATI blower bracket for a member of this board, but it's not cost effective to make one.
Are there any people interested in polished, hardened aluminum ATI P1SC brackets with tensioner and high quality fasteners for $350?
If enough people are interested to make it profitable I may go into business. The target market would be people who want an ATI blower dont want to spend $6000 on a kit.
- Steve
I'm thinking about making an ATI blower bracket for a member of this board, but it's not cost effective to make one.
Are there any people interested in polished, hardened aluminum ATI P1SC brackets with tensioner and high quality fasteners for $350?
If enough people are interested to make it profitable I may go into business. The target market would be people who want an ATI blower dont want to spend $6000 on a kit.
- Steve
Thread Starter
On The Tree
Joined: Jun 2002
Posts: 196
Likes: 0
From: Sacramento
Re: Any interest in ATI brackets? Dont the P600/P600b also use the same brackets? If so, this would allow almost anybody could do a kit for cheap (buying a used P600b head unit from the corral). I'm surprised there isn't more interest.
Adkoonerstrator
iTrader: (4)
Joined: Nov 2001
Posts: 21,420
Likes: 0
From: Deep in the seedy underworld of Koonerville
Re: Any interest in ATI brackets? They probably do Slart. The F1 uses the same mounting holes also. It requires different spacers than the other blowers though.
This would be good for someone that wanted to either make there own intercooler setup or someone that wanted to run a water/alky system and not worry about the intercoolers. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
John
This would be good for someone that wanted to either make there own intercooler setup or someone that wanted to run a water/alky system and not worry about the intercoolers. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
John
Re: Any interest in ATI brackets? The issue is the piping... folks would still have to make/ source that.
I am having a custom Vortech YS trim bracket made for my car, but the saving grace would be that anyone who wanted to run a YS trim wouldn't mind probably making their own piping.
I am having a custom Vortech YS trim bracket made for my car, but the saving grace would be that anyone who wanted to run a YS trim wouldn't mind probably making their own piping.
TECH Addict
Joined: Nov 2001
Posts: 2,659
Likes: 1
From: Bellevue, Wa
Re: Any interest in ATI brackets? Piping is the easy part <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
I am doing a custom setup with a P1SC no intercoolers and water/alky.
When mine is done I will be happy to share the recipe with anybody that is interested.
It will come in thousands less than the kit's out there now and should out perform them to boot <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
<small>[ April 07, 2003, 05:55 PM: Message edited by: Blackbird ]</small>
I am doing a custom setup with a P1SC no intercoolers and water/alky.
When mine is done I will be happy to share the recipe with anybody that is interested.
It will come in thousands less than the kit's out there now and should out perform them to boot <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
<small>[ April 07, 2003, 05:55 PM: Message edited by: Blackbird ]</small>
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Re: Any interest in ATI brackets? The interest lies in how much stronger your brackets would be compared to the ATI bracket. If you can design a bracket with less flex and a tensioner that offers better tension(self adjusting) than the ATI unit you will have a lot of interest, scroll down on this page and you will see that a member Y2K.... had a bracket flexing problem with his high HP/TQ set up and it was chewing up belts left and right. I am in the process of building up a low compression high boost motor and will be pounding out some big numbers so my interest in your brackets is high if they can be made to the above examples.
J <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
J <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
Thread Starter
On The Tree
Joined: Jun 2002
Posts: 196
Likes: 0
From: Sacramento
Re: Any interest in ATI brackets? > The interest lies in how much stronger your brackets would be compared to the ATI bracket.
I can make it as inflexible as anybody would want, if there's enough demand to make it profitable.
The breakeven point depends on how much R&D it takes to make it inflexible. I'll do some research and get back to you.
Steve
I can make it as inflexible as anybody would want, if there's enough demand to make it profitable.
The breakeven point depends on how much R&D it takes to make it inflexible. I'll do some research and get back to you.
Steve
Re: Any interest in ATI brackets? Unfortunately, I don't have a pic of a 98 bracket. I bought a used 01 kit with the 01 bracket, that's why I had to remove my CC from the car.
Maybe someone on here with a 98 could provide a pic?
Maybe someone on here with a 98 could provide a pic?