It runs
Thread Starter
LS1Tech Sponsor
iTrader: (12)
Joined: Nov 2001
Posts: 14,865
Likes: 6
From: Bridgewater,Ma
It runs Started up PurEvl's car today and went to a nice 800rpm,18" of vacuum 
Car is pretty quiet with 2 bullet muffler's.No leaks in any welds or oil lines.Now I just got to take apart the intercooler piping,paint it and redo the coolant lines a better way.
So a few notes
1- Drilling the oil pan is no problem on the car.Took me 5 minutes to drill/tap the pan and the grease caught about 98% of the filings.
2-The stock fans fit no problem
3-This took forever
Link to idle video- This was on first startup after it sat for 4+ months so the lifter's are noisy
http://video.ls1tech.com/player.aspx...E-2D6B8951648F
Car is pretty quiet with 2 bullet muffler's.No leaks in any welds or oil lines.Now I just got to take apart the intercooler piping,paint it and redo the coolant lines a better way.So a few notes
1- Drilling the oil pan is no problem on the car.Took me 5 minutes to drill/tap the pan and the grease caught about 98% of the filings.
2-The stock fans fit no problem
3-This took forever
Link to idle video- This was on first startup after it sat for 4+ months so the lifter's are noisy
http://video.ls1tech.com/player.aspx...E-2D6B8951648F
Last edited by Slowhawk; Dec 18, 2005 at 08:06 PM.
Thread Starter
LS1Tech Sponsor
iTrader: (12)
Joined: Nov 2001
Posts: 14,865
Likes: 6
From: Bridgewater,Ma
Originally Posted by ddnspider
SWEET!get a vid or sound clip Don!im curious how quiet is your definition of quiet
Originally Posted by Slowhawk
Started up PurEvl's car today and went to a nice 800rpm,18" of vacuum Car is pretty quiet with 2 bullet muffler's.No leaks in any welds or oil lines.Now I just got to take apart the intercooler piping,paint it and redo the coolant lines a better way.
So a few notes
1- Drilling the oil pan is no problem on the car.Took me 5 minutes to drill/tap the pan and the grease caught about 98% of the filings.
2-The stock fans fit no problem
3-This took forever
Car is pretty quiet with 2 bullet muffler's.No leaks in any welds or oil lines.Now I just got to take apart the intercooler piping,paint it and redo the coolant lines a better way.So a few notes
1- Drilling the oil pan is no problem on the car.Took me 5 minutes to drill/tap the pan and the grease caught about 98% of the filings.
2-The stock fans fit no problem
3-This took forever
Trending Topics
Thread Starter
LS1Tech Sponsor
iTrader: (12)
Joined: Nov 2001
Posts: 14,865
Likes: 6
From: Bridgewater,Ma
Originally Posted by frcefed98
Yikes you guys beat me to it, better get cracking on finishing mine up
Can't wait to see some video of it on the dyno
Can't wait to see some video of it on the dyno LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
KAOS it was the Phamspeed tubular setup but those guys ditched it because there was to many issue's and they weren't being fixed, so the went with the truck manifold setup.
Slowhawk this car should make big power can't wait to see the numbers. PurEvl must be happy as hell its almost done.
Slowhawk this car should make big power can't wait to see the numbers. PurEvl must be happy as hell its almost done.
I'm glad to see another project from hell coming to an end! What is it with these turbo companies! I'd like to see Edelbrock or another large company come up with one, just like Edelbrock did for the Honda's. Bob
Staging Lane
Joined: Apr 2005
Posts: 67
Likes: 0
From: 123 fake st reading
Originally Posted by Slowhawk
Started up PurEvl's car today and went to a nice 800rpm,18" of vacuum Car is pretty quiet with 2 bullet muffler's.No leaks in any welds or oil lines.Now I just got to take apart the intercooler piping,paint it and redo the coolant lines a better way
Car is pretty quiet with 2 bullet muffler's.No leaks in any welds or oil lines.Now I just got to take apart the intercooler piping,paint it and redo the coolant lines a better way 
Thread Starter
LS1Tech Sponsor
iTrader: (12)
Joined: Nov 2001
Posts: 14,865
Likes: 6
From: Bridgewater,Ma
Originally Posted by V8_DSM_V8again
What do you have for engine mgt...
Looks like a clean install btw...
You will like the MAF in blow thru..
Looks like a clean install btw...
You will like the MAF in blow thru..
The plan is to run it on the dyno and see how quickly we run out of injector (old 60lber's) and go from there.Possibly switching to 96lber's and a BS3.
TECH Resident
Joined: Jun 2004
Posts: 840
Likes: 0
The BS3 is worth it just for the closed loop WB....
It will idle alot better too.. The standalone can better control large injectors for a happier idle..
A GM MAF on a mass airflow translator was one of my favorite DSM mods...
Our stock sensor goes oh sh8t when a big enough turbo is installed..
It will idle alot better too.. The standalone can better control large injectors for a happier idle..
A GM MAF on a mass airflow translator was one of my favorite DSM mods...
Our stock sensor goes oh sh8t when a big enough turbo is installed..