Final pics
Thread Starter
LS1Tech Sponsor
iTrader: (12)
Joined: Nov 2001
Posts: 14,865
Likes: 6
From: Bridgewater,Ma
Final pics Well,for now.
Car is running and took it for a small drive already.In this nice 35 degree weather it show's 8lbs at 3500rpm or so with the controller all the way down.There is no traction in 3 gears probly due to the cold.Here are some pics
Car is running and took it for a small drive already.In this nice 35 degree weather it show's 8lbs at 3500rpm or so with the controller all the way down.There is no traction in 3 gears probly due to the cold.Here are some pics
Last edited by Slowhawk; Dec 2, 2009 at 08:13 AM.
looks awsome\
two questions for my knowledge
what altinator bracket is that i like how it places it nicly out of the way..
and your oil feed line what size line is that and where did you getthe fittings i need to get one made for my new set up
thanks
two questions for my knowledge
what altinator bracket is that i like how it places it nicly out of the way..
and your oil feed line what size line is that and where did you getthe fittings i need to get one made for my new set up
thanks
Thread Starter
LS1Tech Sponsor
iTrader: (12)
Joined: Nov 2001
Posts: 14,865
Likes: 6
From: Bridgewater,Ma
Originally Posted by SINISTER
looks awsome\
two questions for my knowledge
what altinator bracket is that i like how it places it nicly out of the way..
and your oil feed line what size line is that and where did you getthe fittings i need to get one made for my new set up
thanks
two questions for my knowledge
what altinator bracket is that i like how it places it nicly out of the way..
and your oil feed line what size line is that and where did you getthe fittings i need to get one made for my new set up
thanks
2-That is just -4 line.I have a shorter Nitrous feed line to go on it someday.
As for the looks,This is why it took me so long since I did and redid the setup many times. My big things were keeping the stock fans and ground clearance.The next one will be done alot faster now that I have the idea.
The exhaust is awesome.Sounds like a stock car with a Corsa
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by RyanJ
did you modify the t-stat housing at all?
how big is the DP and how does it route?
is that a T4 pt88?
how big is the DP and how does it route?
is that a T4 pt88?
dp is 3 1/2
yes its a t4 pt88
Originally Posted by RealQuick
nice work Don. Probable could have cleaned the paint in the engine bay when everything was out though 
Thread Starter
LS1Tech Sponsor
iTrader: (12)
Joined: Nov 2001
Posts: 14,865
Likes: 6
From: Bridgewater,Ma
Originally Posted by RyanJ
did you modify the t-stat housing at all?
how big is the DP and how does it route?
is that a T4 pt88?
how big is the DP and how does it route?
is that a T4 pt88?
TECH Addict
Joined: Jul 2003
Posts: 2,124
Likes: 0
From: its as intense as the time i forgot how to sit down
Originally Posted by RealQuick
Thats cold blooded Don 
You know he'll have that 500ci engine in before my car is done...
You know he'll have that 500ci engine in before my car is done...
