moving fuse boxes - question for you turbo guys
#3
hey andy. here's my half assed attempt at moving fuse boxes lol. took me about 2.5 seconds, i call it the "shove the ************* out of the way so the blower tube will fit" method
all last year I had them moved to under the frame rail there, they were tied up on the underside, but i'm not doing that this year i don't think, was such a hassle to get at the fuses when i needed to. but i still might do it again, not sure where else to stick the damn things that will look good now.
all last year I had them moved to under the frame rail there, they were tied up on the underside, but i'm not doing that this year i don't think, was such a hassle to get at the fuses when i needed to. but i still might do it again, not sure where else to stick the damn things that will look good now.
Last edited by SilverGhost; 11-11-2007 at 11:50 AM.
#5
Same here I just cut all the wires and left ran them into the inner finder well and connected a 100amp fuse from the batt. to all the hot wires. Dont have a picture of inside the fender well, but not seeing ANY wires at all in the engine compartment is freakin cool!!!! Just doesnt look like it should run!!!! Ha!
#6
Originally Posted by bc56f100
Same here I just cut all the wires and left ran them into the inner finder well and connected a 100amp fuse from the batt. to all the hot wires. Dont have a picture of inside the fender well, but not seeing ANY wires at all in the engine compartment is freakin cool!!!! Just doesnt look like it should run!!!! Ha!
Post some pictures!!
Trending Topics
#8
Dont have much right now I will take some pictures tonight and put them up tomorrow, but heres one of were the fuse box used to be! Oh yea if you take if off I would definitly recamend filling all the holes!!!
#13
I don't know how far you guys are looking to push them out & if these would be of any help, but we have some brackets that were made for our stand alone fuel cell. Here's a few picts:
http://www.harrisspeedworks.com/gall...s.php?album=23
Pic of the brackets:
http://www.harrisspeedworks.com/gall...s.php?album=23
Pic of the brackets:
#15
Thread Starter
6 Second Club Moderator
iTrader: (7)
Joined: Sep 2002
Posts: 3,682
Likes: 0
From: Lombard .IL
Originally Posted by Matt@HSW
I don't know how far you guys are looking to push them out & if these would be of any help, but we have some brackets that were made for our stand alone fuel cell. Here's a few picts:
http://www.harrisspeedworks.com/gall...s.php?album=23
Pic of the brackets:
http://www.harrisspeedworks.com/gall...s.php?album=23
Pic of the brackets:
#16
Originally Posted by Matt@HSW
I don't know how far you guys are looking to push them out & if these would be of any help, but we have some brackets that were made for our stand alone fuel cell. Here's a few picts:
http://www.harrisspeedworks.com/gall...s.php?album=23
Pic of the brackets:
http://www.harrisspeedworks.com/gall...s.php?album=23
Pic of the brackets:
#20