what catch can do you have???
what catch can do you have??? im looking to buy a catch can, what can do you recommend? the amw can is not available until november, any other recommendations would be appreciated.
Originally Posted by bowtieman81
No laughing, but I went with the PVC homemade job for now. I want to see how much oil it will spew into it, then make a nicer aluminum one this winter.
im not going to use a homemade can - i want an already engineered piece that works, i dont want to guinea pig my car. anyone who purchased a can and can recommend please give me info.
Hey bud I have a Greddy that you can have, its a good can, but the amw is better, " with the stainless mesh in the top it works better with vapor" . This way you can still get the amw in November, and have one now. I took it off to put on the amw. I just need shipping, after you get it. You will still need some 3/8 lines, its cheap at Menards or home depot. They have the same clear **** that came with it, that is fiber reinforced. Dan
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
yes it is 
All Star Performance is the one im using........ it was like $70 shipped or so from them.
It has holes for 3/8npt male fittings. I used 3/8npt to -10an fittings and ran braided line from my valve covers......
Ill have finished pics after this weekend....
Kyle
It has holes for 3/8npt male fittings. I used 3/8npt to -10an fittings and ran braided line from my valve covers......
Ill have finished pics after this weekend....
Kyle
Originally Posted by bowtieman81
Nice setup Kyle.
On a side note, what brand/size is that braided flex hose in your bottom pic?
On a side note, what brand/size is that braided flex hose in your bottom pic?
Thats the Radiator hose....... its -20 AN. Aeroquip if i remeber correctly off the top of my head.....
a little spendy but so worht the over all look and flow of things.
Its about $20-25 a ft. and the fittings run anywhere from $45-75 apiece.... and ya need 4 fittings and about 3-4 ft of hose.
Kyle
Originally Posted by Country Boy
I have the AMW, but I got it when they were still like $70. No way I ever pay the $160 they want now..
