use this search 
Kenne Belle?
Thread Starter
Teching In
Joined: Oct 2006
Posts: 4
Likes: 0
Kenne Belle? I'm fairly new to LS1s. I bought a 2002 Trans Am about 2 months ago and I'm loving it but obviously I want it to be a lot faster. I was looking at the Kenne Belle 2.6L supercharger kit and wanted to know a few things. First, what kind of internals come stock in an LS1? I've been looking all over the internet and I can't find any info on the internals. Second, what is the best way to lower the compression? Third, does anybody have this Kenne Belle kit and is it a good investment? Any help will be greatly appreciated. Thanks.
The KB wont fit under an f-body cowl. sorry.
You can get a maggie (magnusen) from Ed @LME which has spacers to lower your k-member for clearance...
Like the others said, search is your friend.
You can get a maggie (magnusen) from Ed @LME which has spacers to lower your k-member for clearance...
Like the others said, search is your friend.
Originally Posted by FIREHAWK#608
The KB wont fit under an f-body cowl. sorry.
You can get a maggie (magnusen) from Ed @LME which has spacers to lower your k-member for clearance...
Like the others said, search is your friend.
You can get a maggie (magnusen) from Ed @LME which has spacers to lower your k-member for clearance...
Like the others said, search is your friend.
Originally Posted by '02 T/A
So could I just get a cowl hood? Would a WS6 hood work. It seems like there would be enough room under my hood. Has anybody tried it or are you guys just speculating that it won't fit? Thanks again.
Look how many posts I have and how long I've been here... Don't you think I might be more than just speculating? I thought I was helping you, but it seems my word doesn't count.
Do you know how to search? Because it's obvious you havn't done so even after all of us advised you of that.
By the way, It's not the hood that's gonna be in the way. Have you noticed that half of your intake manifold (where the KB would now sit) is under the cowl of the car? It's really is the cowl more than the hood giving clearance issues.
Trending Topics
haha this is the best!
ya know what guys let him try it....other then the hood, windshield, windshield wipers, and several other things the KB "WOULD" fit.....so if you want to not use search and also doubt what people say then go for it dude give it a shot!
ya know what guys let him try it....other then the hood, windshield, windshield wipers, and several other things the KB "WOULD" fit.....so if you want to not use search and also doubt what people say then go for it dude give it a shot!
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
BOSS APPROVED!
Originally Posted by '02 T/A
I'm fairly new to LS1s. I want it to be a lot faster. I was looking at the Kenne Belle 2.6L supercharger kit
Welcome to LS1tech. The KB is just too big. I am sure that if you are willing to cut, fabricate and lower some things it could be possible. But you would be better off just bolting on a Procharger D1SC, get 600 rwhp and call it a day. Others have done the Eaton 112, but still had to modify things to work.
Thread Starter
Teching In
Joined: Oct 2006
Posts: 4
Likes: 0
Originally Posted by Urban Legend
Welcome to LS1tech. The KB is just too big. I am sure that if you are willing to cut, fabricate and lower some things it could be possible. But you would be better off just bolting on a Procharger D1SC, get 600 rwhp and call it a day. Others have done the Eaton 112, but still had to modify things to work.
Launching!
Joined: Sep 2005
Posts: 216
Likes: 0
From: Hong Kong
Originally Posted by '02 T/A
First, what kind of internals come stock in an LS1? I've been looking all over the internet and I can't find any info on the internals.
Im not sure what the LS1 has for internals, but my LS2 has:
Cranshaft (1)
Pistons (8)
Rods (8)
Bolts (lots)
Oil (a bit)
Magical Fairy dust (tons)
we are not trying to be dicks but i think the reason firehawk got mad was because you did not listen to what he said....there is no one that has tried this cause it would prob cost close to 15k just to get the KB to work on an fbody. and no one is being a dick to you because you are "knew" we are just trying to point out that if you would have searched and read all of the prob 100 threads you would find with "Kenne Bell" in them you would have found out that no one has done it because its costly and basically not worth the money.
Thread Starter
Teching In
Joined: Oct 2006
Posts: 4
Likes: 0
Originally Posted by crafty888
No need to flame the guy for not searching..... I'll help you out:
Im not sure what the LS1 has for internals, but my LS2 has:
Cranshaft (1)
Pistons (8)
Rods (8)
Bolts (lots)
Oil (a bit)
Magical Fairy dust (tons)
Im not sure what the LS1 has for internals, but my LS2 has:
Cranshaft (1)
Pistons (8)
Rods (8)
Bolts (lots)
Oil (a bit)
Magical Fairy dust (tons)
This post was further down the page from your post...https://ls1tech.com/forums/forced-induction/598256-magnacharged-f-body-new-track-results.html
Some more....
https://ls1tech.com/forums/forced-induction/582864-those-interested-magnuson-kits-f-body-step-inside.html
Spent a total of 5 minutes searching and came up with these 2 but I know there are more on here....Not trying to be a jerk...but Josh was just trying to be helpful by giving advice that was asked for.
Some more....
https://ls1tech.com/forums/forced-induction/582864-those-interested-magnuson-kits-f-body-step-inside.html
Spent a total of 5 minutes searching and came up with these 2 but I know there are more on here....Not trying to be a jerk...but Josh was just trying to be helpful by giving advice that was asked for.
Originally Posted by crafty888
Pssss ..... lets just keep the Magical Fairy Dust a secret then!
FWIW, try calling Ed@LME and asking about whether the KB would work by using the adapters or not. And welcome to the site.
Originally Posted by 2002yroneformula
This post was further down the page from your post...https://ls1tech.com/forums/showthread.php?t=598256
Some more....
https://ls1tech.com/forums/showthread.php?t=582864
Spent a total of 5 minutes searching and came up with these 2 but I know there are more on here....Not trying to be a jerk...but Josh was just trying to be helpful by giving advice that was asked for.
Some more....
https://ls1tech.com/forums/showthread.php?t=582864
Spent a total of 5 minutes searching and came up with these 2 but I know there are more on here....Not trying to be a jerk...but Josh was just trying to be helpful by giving advice that was asked for.
thats prolly not gonna help, im guessing he dosnt know what a magnacharger is.
*edit*
and just for good measure here is the thread of your dreams, titled "kenne bell in a f body?" 30 seconds worth of searching is your friend
https://ls1tech.com/forums/showthrea...ght=kenne+bell
Originally Posted by '02 T/A
You obviously have way too much time on your hands. Why even bother posting **** like this?