Somethings wrong with the car... (video inside)
#102
TECH Senior Member
iTrader: (48)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by 2000 Tran Zam
lol, I know, I pulled all the **** from the top of the tranny out, the console, shifter, all that.
So now I just need to pull the drive shaft, starter, tranny, bell housing, and everything from the pressure plate to the flywheel, again, lol.
I just dont have some of the tools (I.E. extensions) to reach the bolts in the back, so im waiting for some friends to help but their schedules are a little busy this week. Trust me, im trying, I want my car back on the road. Just takes some patience.
So now I just need to pull the drive shaft, starter, tranny, bell housing, and everything from the pressure plate to the flywheel, again, lol.
I just dont have some of the tools (I.E. extensions) to reach the bolts in the back, so im waiting for some friends to help but their schedules are a little busy this week. Trust me, im trying, I want my car back on the road. Just takes some patience.
#103
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by smokinHawk
i dont use any extensions when droping my tranny, i just take the intake manafold off (20min job) and get the top bolts to the tranny from the engine bay.
#104
TECH Resident
iTrader: (6)
Join Date: Nov 2004
Location: northeast Miss.
Posts: 821
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by smokinHawk
i dont use any extensions when droping my tranny, i just take the intake manafold off (20min job) and get the top bolts to the tranny from the engine bay.
"makes mental note"
#105
9 Second Club
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by smokinHawk
i dont use any extensions when droping my tranny, i just take the intake manafold off (20min job) and get the top bolts to the tranny from the engine bay.
Not familiar with your cars.....
But on my car, the T56 is a tight squeeze.
I remove the tranny first, followed by the bellhousing. The top bolts are a doddle that way from underneath. Refitting is also easy, as you dont have that stupid big bellhousing to wriggle in !! The tranny almost slides straight on ( on a transmission jack )
#106
Launching!
iTrader: (9)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by stevieturbo
Not familiar with your cars.....
But on my car, the T56 is a tight squeeze.
I remove the tranny first, followed by the bellhousing. The top bolts are a doddle that way from underneath. Refitting is also easy, as you dont have that stupid big bellhousing to wriggle in !! The tranny almost slides straight on ( on a transmission jack )
But on my car, the T56 is a tight squeeze.
I remove the tranny first, followed by the bellhousing. The top bolts are a doddle that way from underneath. Refitting is also easy, as you dont have that stupid big bellhousing to wriggle in !! The tranny almost slides straight on ( on a transmission jack )
Quoted for truth, I've done it that was several times...
#107
TECH Addict
iTrader: (77)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by smokinHawk
i dont use any extensions when droping my tranny, i just take the intake manafold off (20min job) and get the top bolts to the tranny from the engine bay.
#110
TECH Senior Member
iTrader: (15)
Join Date: Nov 2001
Location: Grand Prairie, TX
Posts: 5,109
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by smokinHawk
i dont use any extensions when droping my tranny, i just take the intake manafold off (20min job) and get the top bolts to the tranny from the engine bay.
![Angel](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_angel.gif)
I can have the 6 speed trans out, on the floor in 30 minutes. take the trans apart at the bell housing, pull it out, then pull the bellhousing next and im done. How long is it taking you folks? I dont think I use but one 12" extension at that.
#114
TECH Senior Member
iTrader: (2)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by V6 Bird
What for? that has to be the dumbest **** ive read on this **** to this day. ![Angel](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_angel.gif)
I can have the 6 speed trans out, on the floor in 30 minutes. take the trans apart at the bell housing, pull it out, then pull the bellhousing next and im done. How long is it taking you folks? I dont think I use but one 12" extension at that.
![Angel](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_angel.gif)
I can have the 6 speed trans out, on the floor in 30 minutes. take the trans apart at the bell housing, pull it out, then pull the bellhousing next and im done. How long is it taking you folks? I dont think I use but one 12" extension at that.
#115
TECH Resident
iTrader: (2)
Join Date: Mar 2005
Location: strong island, NY
Posts: 750
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
oh christ..that video is horrible. I hope this does not happen to me! more so i hope you can finally give us a diagnosis soon! Youll be back up and running man, you paid this far into the life of the prject, you can obviously pay a little more... (cage/and shield at least) At least the motor is fine, we think.