408 Tt
Thread Starter
Joined: Sep 2006
Posts: 1,051
Likes: 3
From: Bloomington, illinois
408 Tt Hey i am trying to plan out my twin turbo set up for my iron block 408 T/A, What turbos would you recomend? I want 800-1000whp and have them spool up quick for the street and good for the track once and a while. please help 
Trending Topics
I put twin 88's on a 352ci LS engine and ran it on a engine dyno. It was ok coming up on boost, but went into boost surge at 7500rpm/1700hp. Precision turbo changed the turbo's to 80's, but I never ran on engine dyno again to test, did well in car. I have the same engine going back in with a single 101 for some more testing next summer.
Kurt
Kurt
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by longrange4u
Man... leave it to Kurt to shut everyone up! LOL So do you think you could have done it with a bigger cube motor? Say a LSX or World block 427?
I did not mean to shut anyone up LOL, just as luck would have it I had already done that. I think I would stick with the twin 80's even on a 427, but it might pull twin 88's. I only tried them because I borrowed the turbo's and thats the size they were. They built the turbo's for a 450ci BB chevy and they ran well on that. I think with all the blocks coming out we will see some bigger turbo engines that will run well!! I can't wait to see what everybody runs next year!
Kurt
Kurt
Originally Posted by longrange4u
Man... leave it to Kurt to shut everyone up! LOL So do you think you could have done it with a bigger cube motor? Say a LSX or World block 427?
Yea I would think your right Kurt... I am looking forward to the GM Perf block comming out... I have also read some good things about the newer sleeved blocks.
Silver... is he running one of the newer blocks? I didnt think a regular 427 on an LS2 block could handle boost well.
Silver... is he running one of the newer blocks? I didnt think a regular 427 on an LS2 block could handle boost well.
Originally Posted by longrange4u
Yea I would think your right Kurt... I am looking forward to the GM Perf block comming out... I have also read some good things about the newer sleeved blocks.
Silver... is he running one of the newer blocks? I didnt think a regular 427 on an LS2 block could handle boost well.
Silver... is he running one of the newer blocks? I didnt think a regular 427 on an LS2 block could handle boost well.
any links to those "good things about newer sleeve..."
Ummm I dont know anything about it... I have really only been following the GM LSX block and the World products block. Like I said earlier.... do a search here in FI for block sleeve and there are some builders that have done good boost numbers on 42x blocks...
Kurt with W2W.... Erik from HK Enterprises... and some of the other custom builders would be good people to ask. I think our sponsor from Canada has some experience with the sleeved blocks as well if my memory serves me.
Kurt with W2W.... Erik from HK Enterprises... and some of the other custom builders would be good people to ask. I think our sponsor from Canada has some experience with the sleeved blocks as well if my memory serves me.
Originally Posted by dreamls1
I am having trouble finding TC66BB Turbos
