83MM #'s
Thread Starter
TECH Fanatic
iTrader: (13)
Joined: Sep 2006
Posts: 1,434
Likes: 3
From: Houston TX/Worldwide
83MM #'s Ok this is with a 83MM turbo pretty much stock 2005 GTO with the only mods done to it is 42lb injectors and tune. Other then that is 100% stock.
As per the dyno sheet I have in my hand. I will have it scanned when I get a chance, The last dyno I posted about had a spike that seen 605rwtq for those who saw that thread.
The dyno was taken on a mustang dyno.
Speed (MPH) 132
Engine Speed (RPM) 6249
Engine Torque 502
Engine HP 464
Boost 10lbs
AFR 14.7
Now as you can see the AFR is hitting a danger zone so it was backed off. Added 60lb injectors and a BAP and he took it too the track with ET streets and ran. AGAIN! the only mods that were added was this turbo kit 60lb injectors and a BAP. (Have not done a dyno since the fuel upgradeds)
As of last night @ HMP
1/8 Mile
Time 7.50
MPH 99.61
60ft 1.81
Next to come is dyno and track times with custom grind cam.
Another thing people have given me crap about posting a dyno sheet and what not but please hold when I get a chance there will be vids, pics and dynosheets.
everyone that wants to know my OFI setup will be tuned this week at Conley's Performance.
As per the dyno sheet I have in my hand. I will have it scanned when I get a chance, The last dyno I posted about had a spike that seen 605rwtq for those who saw that thread.
The dyno was taken on a mustang dyno.
Speed (MPH) 132
Engine Speed (RPM) 6249
Engine Torque 502
Engine HP 464
Boost 10lbs
AFR 14.7
Now as you can see the AFR is hitting a danger zone so it was backed off. Added 60lb injectors and a BAP and he took it too the track with ET streets and ran. AGAIN! the only mods that were added was this turbo kit 60lb injectors and a BAP. (Have not done a dyno since the fuel upgradeds)
As of last night @ HMP
1/8 Mile
Time 7.50
MPH 99.61
60ft 1.81
Next to come is dyno and track times with custom grind cam.
Another thing people have given me crap about posting a dyno sheet and what not but please hold when I get a chance there will be vids, pics and dynosheets.
everyone that wants to know my OFI setup will be tuned this week at Conley's Performance.
Thread Starter
TECH Fanatic
iTrader: (13)
Joined: Sep 2006
Posts: 1,434
Likes: 3
From: Houston TX/Worldwide
Originally Posted by TURBO383WS6
what where his 60' times? at that mph, he should be running quite a bit faster i would think
60' time is 1.81
Thread Starter
TECH Fanatic
iTrader: (13)
Joined: Sep 2006
Posts: 1,434
Likes: 3
From: Houston TX/Worldwide
Originally Posted by SSilverSSurfer
6 speed or auto?
. Not sure if its going to be a Tex dual or LS7 but I told him Tex for sure. Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by NA$TY-TA
Damn 14.7:1 A/F.... id of let off when she rose above in the 12's....... that 3 points higher then i would like........
no doubt, i thought running 12.0 was bad, thank god im at 11.2