Turbo PT 1st gen pics
03-23-2007, 12:37 AM
#7
Sweet!! What front subframe and suspension are you running? Solid rear axle? I'm building a 69 Camaro LSx based twin turbo with a Wayne Due C4 subframe and IRS. Your car sure looks like it'll scoot and take a corner!!!
Ooops,
Sorry for not reading a little closer.
"67 Camaro M6 347 forged LS1, FAST XFI, PT80, A2A, 3.55 12 bolt with DSE and Global West suspension and 18" HRE 541Rs"
Anyway thanks for posting the pics.
-Dave
Ooops,
Sorry for not reading a little closer.
"67 Camaro M6 347 forged LS1, FAST XFI, PT80, A2A, 3.55 12 bolt with DSE and Global West suspension and 18" HRE 541Rs"
Anyway thanks for posting the pics.
-Dave
Trending Topics
03-23-2007, 07:48 AM
#12
Staging Lane
iTrader: (14)
Join Date: Jun 2006
Location: South Texas
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
That's a very nice looking '67.
Those pictures get me anxious to get busy on my car, even though I'm going for a straight line theme, not a corner carver. I agree with all the comments above and I also like the RS replacement lenses & SS cap out back. Great project!
Those pictures get me anxious to get busy on my car, even though I'm going for a straight line theme, not a corner carver. I agree with all the comments above and I also like the RS replacement lenses & SS cap out back. Great project!
03-23-2007, 09:54 AM
#18
John- I plan on it. If you think way back... this is the same one I built in Jan of 04. FAST used it to prototype the crank signal interface when everyone was using flying magnet wheels 
This thing has mabye 20 or 30 miles on it since then.
This thing has mabye 20 or 30 miles on it since then.
03-23-2007, 11:15 AM
#19
On The Tree
Love the turbo / intercooler placements. Nice and cool clean, (maybe even ram air) in and a short run to the intercooler. Then a nice short run to the intake.
Do you have a picture of the turbo support bracket that you used?
Do you have a picture of the turbo support bracket that you used?
