My APS TT Install Thread
Well that jives pretty well with expected hp at that boost level on stock engine I would think. How do you make the thumbnails bigger ,can't read them.
Especially wanted to look at the afr also. Wonder how that ls7 clutch is going to hold up.
Especially wanted to look at the afr also. Wonder how that ls7 clutch is going to hold up.
Originally Posted by JMBLOWNWS6
How much boost? Are you running off 8 psi wastegate springs?
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by MY99TAWS6
Well that jives pretty well with expected hp at that boost level on stock engine I would think. How do you make the thumbnails bigger ,can't read them.
Especially wanted to look at the afr also. Wonder how that ls7 clutch is going to hold up.
Especially wanted to look at the afr also. Wonder how that ls7 clutch is going to hold up.
TECH Apprentice
Joined: Jul 2002
Posts: 369
Likes: 0
From: clio mi
Very nice. that should put me right where I'm at with the bottle now, and I wont have to worry about haveing to have it filled or if its empty or not lol.
Are you going to make it on tuesday? I seen MM is putting it on and I joined just to see you run it so your going too have to go now lol.
Are you going to make it on tuesday? I seen MM is putting it on and I joined just to see you run it so your going too have to go now lol.
Good to see. My install is well underway. I'll be running 10 psi through an auto.
I'm sure lots of people who have this kit are reading this thread. So I'll share my experience from today.
The kit CAN be made to work with a 4L80E. It doesn't really fit without some moddng to the bellhousing but it can be done.
I'm sure lots of people who have this kit are reading this thread. So I'll share my experience from today.
The kit CAN be made to work with a 4L80E. It doesn't really fit without some moddng to the bellhousing but it can be done.
Originally Posted by n2ojunkie
Very nice. that should put me right where I'm at with the bottle now, and I wont have to worry about haveing to have it filled or if its empty or not lol.
Are you going to make it on tuesday? I seen MM is putting it on and I joined just to see you run it so your going too have to go now lol.
Are you going to make it on tuesday? I seen MM is putting it on and I joined just to see you run it so your going too have to go now lol.
Originally Posted by calongo_SS
Good to see. My install is well underway. I'll be running 10 psi through an auto.
I'm sure lots of people who have this kit are reading this thread. So I'll share my experience from today.
The kit CAN be made to work with a 4L80E. It doesn't really fit without some moddng to the bellhousing but it can be done.
I'm sure lots of people who have this kit are reading this thread. So I'll share my experience from today.
The kit CAN be made to work with a 4L80E. It doesn't really fit without some moddng to the bellhousing but it can be done.
Im going to run about 16 to 18 psi thru the 4l80 
Originally Posted by mdhmi
Congrats Tony. 500 makes for a fun daily driver.
See yas on Tuesday.
See yas on Tuesday.
Would like more pics and info on 480 install just in case get sick of my t56 and clutch. So modding being like a dremel to the bellhousing or what.Can you be a bit more specific Calongo SS?
And Hugger you haven't tracked it yet ..no problem but what is it like in daily driving. Lets have some impressions now of bottom end spool up, etc.etc...you must be driving it around now? I would be driving it 24/7.
That kit looks awesome!