The Monster Rear-mount is comming!!! LMR's build! (PICS)
12-30-2007, 06:15 AM
#62
9 Second Club
Thread Starter
iTrader: (2)
Join Date: Jun 2005
Location: Reston, VA
Posts: 2,034
Likes: 0
Received 0 Likes
on
0 Posts
Ok.. Update... we had installed the wideband sensor Pre-turbo originally thinking it would be ok, but with the coated exhaust and wrapped exhaust the temps are still too much... waiting for the extension to come in.... should be here mid week and some initial dyno runs by weeks end!!!
12-30-2007, 11:48 AM
#63
Install the sensor post turbo if possible, it prevents the sensor reading from being skewed by the exhaust pressure. The Bosche sensors don't skew as bad as the NTK L1H1 and L2H2 though (what I use).
Once I get a muffled exhaust fabbed up for my car I'm going to relocate the sensor to after the turbo.
Once I get a muffled exhaust fabbed up for my car I'm going to relocate the sensor to after the turbo.
