Ofi Kit For My New Car :) .
#81
10 Second Club
iTrader: (5)
Join Date: Nov 2001
Location: Cali/Bay Area
Posts: 3,412
Likes: 0
Received 0 Likes
on
0 Posts
Sounds right to me. Also sounds like you have big enough line to support at least 2000 whp. You could have went off the Y into your fuel rails with a smaller than -12 line since your feeding both from a single -12, but at least you know you have more than enough volume there.
#85
TECH Enthusiast
Thread Starter
Join Date: Jul 2005
Location: kuwait
Posts: 705
Likes: 0
Received 0 Likes
on
0 Posts
thanks , i will have some pic for you guys today for the engin and the turbo on the car but i was busy little chraying to have my douwn pipe to fit ,, it was my misstake that i didnt told joel that i have the manual steering rack (mad man ) on my car the kit was made to fit the stock steering shaft, so what was happning is the down pipe was hitting the steering shaft and there was no place to run it throw there . so what i did is i had it cut it for know . and i got the new Turbo style high-clearance K-member with LS1 motor mounts - Pinto style manual rack mounts from BMR with new steering shaft and they are on the way to joel so he can make for me new down pipe to it so it will help any one that is going to have manual steering shaft on hes car he can make it for hem to fit .and am planing to make it 5inch if he can do that when the parts gets to hem .
#94
TECH Enthusiast
Thread Starter
Join Date: Jul 2005
Location: kuwait
Posts: 705
Likes: 0
Received 0 Likes
on
0 Posts
I really didnt got the car douwn from the left i know that we have to do some modfication on it when we get down the left ,, and there is not enaf room around the steering i bent the pipe maybe to haf of it and still hitting the steering shaft ,, my new K-MEMBER going to joel right now and we will get it done .
#95
Launching!
Join Date: Feb 2005
Location: Woodlands,TX
Posts: 266
Likes: 0
Received 0 Likes
on
0 Posts
hey i see going with that ofi kit is turning out pretty good ? Glad to see things are working out for ya man. Not sure you would have been as happy with the other kit!
#97
TECH Enthusiast
Thread Starter
Join Date: Jul 2005
Location: kuwait
Posts: 705
Likes: 0
Received 0 Likes
on
0 Posts
Thanks bro i really like my GEN-TT kit i drive it every day and its good to .and am happy with the OFI at the same time .
#98
TECH Enthusiast
Thread Starter
Join Date: Jul 2005
Location: kuwait
Posts: 705
Likes: 0
Received 0 Likes
on
0 Posts
Yes its BMR K-MEMBER but the one that i have its the old stille that they have i have it from 3 years a go .so right lnow like i sad befor my new BMR K-member is going to bob @ EPP and we are going to have it shipped to OFI to joel so he can make the new down pipe for me am looking for 5insh right now but he told me he will see if he can do that when its get to hem.
#100
10 Second Club
iTrader: (5)
Join Date: Nov 2001
Location: Cali/Bay Area
Posts: 3,412
Likes: 0
Received 0 Likes
on
0 Posts
thanks , i will have some pic for you guys today for the engin and the turbo on the car but i was busy little chraying to have my douwn pipe to fit ,, it was my misstake that i didnt told joel that i have the manual steering rack (mad man ) on my car the kit was made to fit the stock steering shaft, so what was happning is the down pipe was hitting the steering shaft and there was no place to run it throw there . so what i did is i had it cut it for know . and i got the new Turbo style high-clearance K-member with LS1 motor mounts - Pinto style manual rack mounts from BMR with new steering shaft and they are on the way to joel so he can make for me new down pipe to it so it will help any one that is going to have manual steering shaft on hes car he can make it for hem to fit .and am planing to make it 5inch if he can do that when the parts gets to hem .
Dan