What type of make your own custom wire sets are you guys using. Besides the junk MSD wire sets. haha. I wish Taylor made something for the LS in their 10.4mm series, but no love.

 

I guess you could get any universal set and make them yourself.

The coil ends are available on Summits site, and the plug end is just a plug end.

 

I used the Taylor Universal wires and ends to make my custom set. You can get everything from Summit.

Keith

 

Taylor can make you anything you need call them. I got mine done custom. You have to call Taylor create what you want they will create a part# you will then need a Taylor vendor to order and the pricing will be given to the vendor. That stuff comes in spools. Alot easier to have them put the connectors on vs. doing it yourself cause its a pain in the ***.

FYI mine were 10.4MM with LS1 style connect with a 135degree boot

 

Taylors site is lackluster to say the least. I will browse through Summit.

Thanks for the info.

 

TJ,

Give Beck racing engines a call. They make amazing products and their plug wires are ******* sexy. 125 or was it 155 bucks for a custom set of 8.

 

I've done about 20 sets using a few different brands. I like the Crane Firewire the most, easy to work with and very low resistance.

 

Would this kit work goin onto the ls coil packs? CRN-255-0082

If not what kit did you use? I need 90 degree plugs on both sides.

 

Which part number do you guys use for coil side ??

 

I have 7 taylor wires for an ls1

https://ls1tech.com/forums/lsx-parts-sale/912685-taylor-10-4-wires.html

 

they do pm for a part number i have them in front of me

 

Can you post it up here, i would be intersted as well . What boots do they have on the plugs, i to need 90*.

 

thunder volt 50 10.4 black 45/135 deg ls1 coil ends with 90 deg boots .. TA3708

 

here they are

 

ta 3708???? Gonna.....make.....love......to you! hahhah awesome, thanks, and sorry for the gay comment.

 

Thanks for posting that up!

Tried looking that part number up, but must be a custom one not in their catalog http://www.taylorvertex.com/Products.../SparkPlugSets. I'll give them a call. Remember what the length was?

Dan