LS2 403 D1SC Procharged 'street driver'.
#47
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I was also able to get the Bigger K&N filter installed on the stock inlet hat hose of the D1SC between the front bumper facia and the driver side intercooler piping. I also removed the driver side fog light for a more direct air flow to the filter.
I made a manifold vacuum tree for all the items that need a vacuum supply that I did not have to worry about before the ATI Procharger install. Some of these items are the AIS Methanol Injection kit, boost recirc valve, Tial BOV, hobb switch for 2nd Walbro GS340, and Boost referenced FPR.
I made a manifold vacuum tree for all the items that need a vacuum supply that I did not have to worry about before the ATI Procharger install. Some of these items are the AIS Methanol Injection kit, boost recirc valve, Tial BOV, hobb switch for 2nd Walbro GS340, and Boost referenced FPR.
#51
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Idle clips and dyno charts coming as soon as I have time to post it all up.
It is running and everything is working properly right out of the gate, I guess I am lucky. Initial numbers are from 9 psi. I was hoping to make 12 psi.![Sad](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_sad.gif)
I will take it to the track in a week or so and see what 9 psi is worth then worry about spinning it up.
Presently running a 7.25/3.55 pulley combo.
It is running and everything is working properly right out of the gate, I guess I am lucky. Initial numbers are from 9 psi. I was hoping to make 12 psi.
![Sad](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_sad.gif)
I will take it to the track in a week or so and see what 9 psi is worth then worry about spinning it up.
Presently running a 7.25/3.55 pulley combo.
#57
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
LOOKS AWESOME, one question for you though? Where did you get the piece in this pic https://ls1tech.com/forums/attachmen...9&d=1220122555
Trying to find a way to mount up my Vortech Mondo bypass valve and I need a flange like that I suppose??
Trying to find a way to mount up my Vortech Mondo bypass valve and I need a flange like that I suppose??
#60
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
LOOKS AWESOME, one question for you though? Where did you get the piece in this pic https://ls1tech.com/forums/attachmen...9&d=1220122555
Trying to find a way to mount up my Vortech Mondo bypass valve and I need a flange like that I suppose??
Trying to find a way to mount up my Vortech Mondo bypass valve and I need a flange like that I suppose??