intercooler fitting???
I cut the front out of my bumper support and put the IC in there. Bolted it down from the top. I can't see it working very well if it's in front of the support like pictured above. There is no where for the air to go through it.
alot of people use smokinhawk's relocation bracket, send him a pm https://ls1tech.com/forums/member.php?u=2311
most people run an Air to Air intercooler like mine pictured here
and this is how i mounted it
i used 2" square tubing, then came off of it with 2 pieces or 3/4" square tubing.. this also allows a little bit of adjustment from left to right so you can center everything up perfectly.. im going to weld it all up
mount
and this is how i mounted it
i used 2" square tubing, then came off of it with 2 pieces or 3/4" square tubing.. this also allows a little bit of adjustment from left to right so you can center everything up perfectly.. im going to weld it all up
mount
Is that the ebay intercooler and what size is it my man
