Video of the Moser TQ Arm Breakage
Thread Starter
On The Tree
Joined: Nov 2001
Posts: 1,100
Likes: 0
From: Charlestown, Indiana
Video of the Moser TQ Arm Breakage I just added one more video to the site. This was where I was attempting to launch on the Trans-Brake with 8lbs of boost (as compared to the 3lb launch on my 9.86 pass). It completely shattered the solid steel TQ Arm mount, along with breaking the driveshaft and U-Joint. Replaced everything over the weekend, and found out it also broke the sprag in the transmission. 
Maybe we can get it back together in time to play some more next weekend.
Kinda sucked...I was just gettin' in the groove...
Here's the link again:
http://www.LS1Motorsports.com/Project-Camaro.asp
Maybe we can get it back together in time to play some more next weekend.Kinda sucked...I was just gettin' in the groove...
Here's the link again:
http://www.LS1Motorsports.com/Project-Camaro.asp
Thread Starter
On The Tree
Joined: Nov 2001
Posts: 1,100
Likes: 0
From: Charlestown, Indiana
Re: Video of the Moser TQ Arm Breakage Oh yea, also added some videos of the Turbo Buick's 9 second passes. In case any of you out there like anything besides F-bodies....
http://www.LS1Motorsports.com/Project-87TurboBuick.asp
And at the VERY BOTTOM of the same page, there's a link to a video of our first day at the track with the '03 Harley Truck. (PSJ- You might like it) My girlfriend was actually driving it. She's pretty good. (<--at driving)
http://www.LS1Motorsports.com/Project-87TurboBuick.asp
And at the VERY BOTTOM of the same page, there's a link to a video of our first day at the track with the '03 Harley Truck. (PSJ- You might like it) My girlfriend was actually driving it. She's pretty good. (<--at driving)
Thread Starter
On The Tree
Joined: Nov 2001
Posts: 1,100
Likes: 0
From: Charlestown, Indiana
Re: Video of the Moser TQ Arm Breakage One more thing....I went in and cleaned up the all of the videos of the Z. I didn't realize the quality was so poor before. I'm using all new video editing equipment, and haven't quite got the hang of it yet.
That's it...I'm going to bed now.
That's it...I'm going to bed now.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Staging Lane
Joined: Apr 2003
Posts: 80
Likes: 0
From: Florida
Re: Video of the Moser TQ Arm Breakage
Oh yea, also added some videos of the Turbo Buick's 9 second passes. In case any of you out there like anything besides F-bodies....
http://www.LS1Motorsports.com/Project-87TurboBuick.asp
And at the VERY BOTTOM of the same page, there's a link to a video of our first day at the track with the '03 Harley Truck. (PSJ- You might like it) My girlfriend was actually driving it. She's pretty good. (<--at driving)
http://www.LS1Motorsports.com/Project-87TurboBuick.asp
And at the VERY BOTTOM of the same page, there's a link to a video of our first day at the track with the '03 Harley Truck. (PSJ- You might like it) My girlfriend was actually driving it. She's pretty good. (<--at driving)
Hope you don't mind....
Thanks for sharing those videos with us slow guys!
Moderator
Joined: Nov 2001
Posts: 3,048
Likes: 12
From: Raleigh, NC
Re: Video of the Moser TQ Arm Breakage I hate that. The down-low power may give you bragging rights, but it don't win races.
WONDERFUL that it makes that kind of power. I have 656 RWTQ and in a 4000 lb. car, unless you beef up a lot of things, you are going to just break stuff.
Now, if I could find a way to shed two or three hundred pounds...
WONDERFUL that it makes that kind of power. I have 656 RWTQ and in a 4000 lb. car, unless you beef up a lot of things, you are going to just break stuff.
Now, if I could find a way to shed two or three hundred pounds...
Good luck on fixing everything and getting back on track 
Re: Video of the Moser TQ Arm Breakage I had a few of my friend look over my shoulder when we watched the video of the rearend breaking....it was a gasp, alot of 4 letter words, then "DAMN THAT WAS COOL!" Got any pics of the actual carnage?