MTI's prototype MagnaCharger TVS 'vette
Thread Starter
11 Second Truck Club
iTrader: (34)
Joined: Mar 2006
Posts: 2,858
Likes: 0
From: Dallas, Georgia
MTI's prototype MagnaCharger TVS 'vette got to see this Saturday at a local car show...
MTI's prototype MagnaCharger TVS 'vette @ Corvette Super Saturday
MTI's prototype MagnaCharger TVS 'vette @ Corvette Super Saturday
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
BOSS APPROVED!
So 580-620rwhp @ 6 PSI if I am understanding it right. Not groundbreaking. The motor itself on low compression and mild setup should be good for at least 480 one would think.
****. I'm impressd. I made 615 @ 7.5 psi on a 346 with alot of other mods. 6 psi, and nearly 700 wheel,...is no bullshit.
My very giving figures were based off of a lot of assumptions. I am sure the 427 is North of 500 probably closer to 550 but until we here from the builder/owner we will not know.
On The Tree
Joined: Nov 2005
Posts: 186
Likes: 0
I talked to one of the techs yesterday and he said that the TVS S/C is on a another level from the others. I think they are going to test it out at the Road Atlanta NASA event this weekend. I'll probably go and check it out. I'm wondering how it compares to the 454 LS7 that was formerly in the car.
Last edited by NEVRLIFT; Aug 4, 2008 at 09:23 PM.
Fixed.
I talked to one of the techs yesterday and he said that the TVS S/C is on a another level from the others. I think they are going to test it out at the Road Atlanta NASA event this weekend. I'll probably go and check it out. I'm wondering how it compares to the 454 LS7 that was formerly in the car.
I talked to one of the techs yesterday and he said that the TVS S/C is on a another level from the others. I think they are going to test it out at the Road Atlanta NASA event this weekend. I'll probably go and check it out. I'm wondering how it compares to the 454 LS7 that was formerly in the car.
wow they took a picture of the screen and printed it out. why not use the Print screen cammand an print the image, or just go to file and print "ctrl P". n e ways. if the numbers are at the RW then those are pretty impressive for the 1.9L. just boggles my mind that people are doing these builds and using the TVS and maggies, why not use a twin screw?