D1SC Install help!!!
Thread Starter
Staging Lane
Joined: Jul 2005
Posts: 85
Likes: 0
D1SC Install help!!! Im in the middle of installing a D1SC on my 2001 camaro ss. I ordered the complete from EPP and Im at the part where it tells you to install the inline fuel pump and new hose with the t-fitting. I noticed my kit did not come with one. I installed the walbro intank fruel pump and injectors that come with the kit. Am I missing a piece or does the kit not come with the fuel pump they are talking about in the ATI manual because of the injectors and Walbro fuel pump Bob sends!!!!
Thread Starter
Staging Lane
Joined: Jul 2005
Posts: 85
Likes: 0
Thanks for the fast reply guys!!!! I was just making sure I was not missing these parts. So just to clarify, Since I installed the walbro intank fuel pump and bigger injectors, I do not need the fuel pump the ATI manuel is talking about?
correct, dont feel bad, i wondered the same thing when i was doing my install. enjoy your new found power!!
Trending Topics
The inline fuel pump that is mentioned in the ProCharger manual is what comes with their complete P-1SC kits. A D-1SC through ProCharger is not offered with a fuel pump as a standard item. Bob
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Thread Starter
Staging Lane
Joined: Jul 2005
Posts: 85
Likes: 0
Thanks for the help guys!!!! I think the D1SC kit should also come with longer blower pully bolts and have the sumper damper drilled but if eveerything was already sone for me---- What fun would that be!!! lol I'm just about complete with the kit and then all I have left is the gauges and and wait for my computer to return from EPP. I keep you posted and thanks again!!!
Thanks for the help guys!!!! I think the D1SC kit should also come with longer blower pully bolts and have the sumper damper drilled but if eveerything was already sone for me---- What fun would that be!!! lol I'm just about complete with the kit and then all I have left is the gauges and and wait for my computer to return from EPP. I keep you posted and thanks again!!!