Best Twin Turbo kit for a C6Z06 corvette?
09-23-2008, 07:44 PM
#1
Registered User
Thread Starter
Join Date: Sep 2008
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Best Twin Turbo kit for a C6Z06 corvette? Who makes the best quality Twin turbo kit for the C6Z06 corvette?
APS
Ligenfelter
TTi
STS (rear mount)
HP performance
Are there any others I am missing?
If you have used any of these kits (or one I haven't mentioned) I would appreciate hearing your experience . Thanks
APS
Ligenfelter
TTi
STS (rear mount)
HP performance
Are there any others I am missing?
If you have used any of these kits (or one I haven't mentioned) I would appreciate hearing your experience . Thanks
09-24-2008, 01:12 AM
#4
FormerVendor
iTrader: (2)
Join Date: Sep 2005
Location: Australia
Posts: 1,968
Likes: 0
Received 0 Likes
on
0 Posts
There's some good reading in this thread from Speed inc on there recent twin turbo ZO6 build up, 
http://forums.corvetteforum.com/show....php?t=2079557
Peter
http://forums.corvetteforum.com/show....php?t=2079557
Peter
Last edited by peter@aps; 09-24-2008 at 05:24 PM.
09-24-2008, 10:19 AM
#5
FormerVendor
We've been very pleased with all of the APS systems.
I run the C6Z system on my own car and it's working great- https://ls1tech.com/forums/forced-induction/954866-twin-turbo-zo6-speed-inc.html
The car is extremely fun to drive, very quick transient response while still carrying out power until 7,000+rpm.
The APS system on my car made 854rwhp @6,350rpm and was still at 801rwhp @7,100rpm (13psi and 93 octane). That's carrying out the power pretty far for twin T3's on 427ci. APS makes their own 1.06 a/r exhaust housing which helps make that possible.
Quality and fitment of the system is also excellent. Cast iron manifolds and cast aluminum turbo inlets/maf housing are a nice touch.
I run the C6Z system on my own car and it's working great- https://ls1tech.com/forums/forced-induction/954866-twin-turbo-zo6-speed-inc.html
The car is extremely fun to drive, very quick transient response while still carrying out power until 7,000+rpm.
The APS system on my car made 854rwhp @6,350rpm and was still at 801rwhp @7,100rpm (13psi and 93 octane). That's carrying out the power pretty far for twin T3's on 427ci. APS makes their own 1.06 a/r exhaust housing which helps make that possible.
Quality and fitment of the system is also excellent. Cast iron manifolds and cast aluminum turbo inlets/maf housing are a nice touch.
Trending Topics
09-25-2008, 01:38 PM
#8
We've used most of the Corvette kits currently available, and I would have to say that overall, I think TTi makes the best kit for the money. Nothing against the other choices, but when you compare what you get to what you pay, George and Co. are hard to beat.
Ed
Ed
09-25-2008, 07:17 PM
#9
Registered User
Thread Starter
Join Date: Sep 2008
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
